07-04-2015, 01:11 PM | #1 |
Not Yet Wild
Join Date: Apr 2015
Posts: 52
|
Precedent primary clutch
I've got the tools to take the primary clutch off my 04 precedent what's the best way to get to it, I've tried dropping the motor down to get to the clutch I can't get it to drop down enough will someone explain to me the best way to get to the primary clutch so I can replace the gasket behind the clutch.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
07-04-2015, 08:16 PM | #2 |
Getting Wild
Join Date: Jan 2015
Location: s e mo
Posts: 120
|
Re: Precedent primary clutch
easier to pull engine
|
07-04-2015, 08:56 PM | #3 |
Gone Wild
Join Date: Dec 2007
Location: SE Indiana
Posts: 392
|
Re: Precedent primary clutch
Really bad design and they knew it. You have to unbolt right spring and drop that side down.
|
07-06-2015, 03:29 PM | #4 |
revolutiongolfcars.com
Join Date: Mar 2010
Location: Golf Car Capital of The World... Augusta, Georgia
Posts: 10,224
|
Re: Precedent primary clutch
I've always had the best luck by unbolting the bottom of both rear shocks and pulling the bolts out of the spring shackles. Then you can use a jack under the back of the car to lift it up. The motor pan and transaxle will sit on the ground and the car will move up. You can get the clearance you need that way.
|
07-07-2015, 08:26 AM | #5 |
Not Yet Wild
Join Date: Apr 2015
Posts: 52
|
Re: Precedent primary clutch
Thank you all for infor. I got it done, I had the best of luck doing like Tahoe dogz71 said
|
|
|
Similar Threads | ||||
Thread | Forum | |||
G16 Primary Clutch | Gas Yamaha | |||
Precedent primary clutch removal | Gas Club Car | |||
primary clutch on G2 | Gas Yamaha | |||
G9 Primary Clutch | Gas Yamaha | |||
05 precedent primary clutch question? | Gas Club Car |