08-04-2021, 07:51 AM | #21 |
How Can I Help?
Join Date: Oct 2009
Location: SW Wisc & West Central, FL
Posts: 1,383
|
Re: Need help 2011 par car summit
Using the schematic and wiring diagram as a reference, let's troubleshoot. (Power is off)
1. Back at the beginning, let's go to the potbox. Unplug the black and white wires coming out of the inside of the box itself and connect to your ohhmeter. Should be close to 0 ohms. Press accelerator and should go smoothly from about 0 up to 5000 ohms as you press the accelerator. 2. Unplug the encoder and unplug the controller. Then measure the ohms at the harness between the green and red wire of where the encoder WAS plugged in. That should be 10k ohms as that's where the resister would have been across. The controller gets programmed for that reference resistance. Start with those two things. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
08-16-2021, 09:27 AM | #22 |
Not Yet Wild
Join Date: Jun 2021
Posts: 22
|
Re: Need help 2011 par car summit
I can not find a 10k on my cart anywhere I need your expertise
|
08-16-2021, 09:29 AM | #23 |
How Can I Help?
Join Date: Oct 2009
Location: SW Wisc & West Central, FL
Posts: 1,383
|
Re: Need help 2011 par car summit
Go back to the main harness. There should be a label near the 16 pin connector with a part number on it. Let's verify that. Being a 2004 makes it more difficult to know what it really has.
|
08-21-2021, 09:55 AM | #24 |
Not Yet Wild
Join Date: Jun 2021
Posts: 22
|
Re: Need help 2011 par car summit
Looking at the top left 8 bottom 1 top right 16 bottom 9 side B
|
08-21-2021, 10:21 AM | #25 |
How Can I Help?
Join Date: Oct 2009
Location: SW Wisc & West Central, FL
Posts: 1,383
|
Re: Need help 2011 par car summit
Looking for a white label wrapped around the harness itself about 6” or so from the connector. That is whee columbia attaches the harness part number.
|
08-21-2021, 12:33 PM | #26 |
Not Yet Wild
Join Date: Jun 2021
Posts: 22
|
Re: Need help 2011 par car summit
There is no tag on my wires
|
08-24-2021, 03:12 PM | #27 |
Not Yet Wild
Join Date: Jun 2021
Posts: 22
|
Re: Need help 2011 par car summit
I was told sevcom needs to be reprogrammed is this the true
|
08-24-2021, 03:14 PM | #28 |
How Can I Help?
Join Date: Oct 2009
Location: SW Wisc & West Central, FL
Posts: 1,383
|
Re: Need help 2011 par car summit
Did it work before? Only have to reprogram if it was programmed wrong and never worked or if something else was changed and not original.
|
08-24-2021, 04:11 PM | #29 |
Not Yet Wild
Join Date: Jun 2021
Posts: 22
|
Re: Need help 2011 par car summit
When I bought the cart it would only do 8 mph and is suppose to do 19 mph I only changed the batteries
|
08-24-2021, 05:08 PM | #30 |
How Can I Help?
Join Date: Oct 2009
Location: SW Wisc & West Central, FL
Posts: 1,383
|
Re: Need help 2011 par car summit
If you want to send me the controller I can test it for sure before anything else then you know what you have
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Summit sometimes no reverse | Columbia ParCar | |||
summit II | Electric Club Car | |||
Wanted ,2011 columbia summit cowl | Golf Carts and Parts | |||
180 summit | Electric Club Car | |||
summit | Electric Yamaha |