Parts Needed to Upgrade 36V EZGO txt to 42v??

dariusezgo · 11-04-2015, 09:30 PM

Hey Guys,

New member here. I've been curious about upgrading my 2001 36V EZGO TXT with PDS to a 42 V.

I like the idea of adding a new 6V battery. I like the greater performance while using the existing space under the seat.

I suspect I need:

1) A new controller (which kind? Model #?)
2) A new solenoid (which kind? Model #?)
3) thicker gauge cables?
4) 42 V charger (again model #'s, etc?)

Anything else I need to keep in mind? Thanks everyone!

scottyb · 11-04-2015, 09:37 PM

Use an Alltrax aftermarket 400 a control. DCX400PDS on sale with 200a solenoid for $499 or XCT400PDS and HD 200 solenoid for $529
Both here > http://www.cartsunlimited.net/Custom_Options.html

JohnnieB · 11-05-2015, 11:47 AM

1. XCT48400PDS or DCX400PDS controller
2. Solenoid that works on 42V (The one I use works on 36V, 42V and 48V)
3. All 10 high current cable should be 4Ga or thicker. Stock F1&F2 cables will suffice unless insulation is worn were they are routed around the battery box frame.
4. DPI Accusense 42V charger.

11-04-2015, 09:30 PM	#1
dariusezgo Not Yet Wild Join Date: Nov 2015 Posts: 1	Parts Needed to Upgrade 36V EZGO txt to 42v?? Hey Guys, New member here. I've been curious about upgrading my 2001 36V EZGO TXT with PDS to a 42 V. I like the idea of adding a new 6V battery. I like the greater performance while using the existing space under the seat. I suspect I need: 1) A new controller (which kind? Model #?) 2) A new solenoid (which kind? Model #?) 3) thicker gauge cables? 4) 42 V charger (again model #'s, etc?) Anything else I need to keep in mind? Thanks everyone!
dariusezgo Not Yet Wild Join Date: Nov 2015 Posts: 1

11-04-2015, 09:37 PM	#2
scottyb Happy Carting Join Date: Dec 2007 Location: Southern California Posts: 73,410	Re: Parts Needed to Upgrade 36V EZGO txt to 42v?? Use an Alltrax aftermarket 400 a control. DCX400PDS on sale with 200a solenoid for $499 or XCT400PDS and HD 200 solenoid for $529 Both here > http://www.cartsunlimited.net/Custom_Options.html

11-05-2015, 11:47 AM	#3
JohnnieB Techno-Nerd Join Date: Jun 2011 Location: West Virginia Posts: 19,654	Re: Parts Needed to Upgrade 36V EZGO txt to 42v?? 1. XCT48400PDS or DCX400PDS controller 2. Solenoid that works on 42V (The one I use works on 36V, 42V and 48V) 3. All 10 high current cable should be 4Ga or thicker. Stock F1&F2 cables will suffice unless insulation is worn were they are routed around the battery box frame. 4. DPI Accusense 42V charger.

Similar Threads
Thread	Forum
Ezgo seat pod parts needed	Golf Carts and Parts
ezgo marathon parts needed	Golf Carts and Parts
2000 EZGo series -- what exactly is needed to upgrade to 48 volts?	Electric EZGO
needed ezgo parts	Golf Carts and Parts
86 ezgo carb parts needed	Gas EZGO

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum