Ezgo ITS Troubleshooting

Bmatlock00 · 11-16-2015, 04:40 PM

I replaced my AXE4865 with an SPM48400 controller today and it looks like the problem is fixed. It is running great, but my only concern is the LED blinks RED 4 times then turns solid red when the controller powers on. It is blinking the correct sequence for the ITS except it is red instead of green. It is probably unlikely, but could the LED have been installed backwards at the factory?

JohnnieB · 11-16-2015, 04:48 PM

There have been other Alltrax controllers whose LED flashed the wrong color.

Give the vendor or Alltrax a call.

Bmatlock00 · 11-16-2015, 04:54 PM

Ok, i'll give them a call. As for the AXE4865, is there anything that can be done with it or is it garbage?

cgtech · 11-16-2015, 07:28 PM

AXE is not rebuildable, its a paperweight, and maybe a stinky one.

Bmatlock00 · 11-16-2015, 08:45 PM

Quote:

Originally Posted by cgtech

AXE is not rebuildable, its a paperweight, and maybe a stinky one.

Nope not stinky or burned, and looks like brand new. It just decided to work when it wants to the other day. These things cost too much to not be repairable.

scottyb · 11-16-2015, 09:55 PM

Quote:

Originally Posted by Bmatlock00

Nope not stinky or burned, and looks like brand new. It just decided to work when it wants to the other day. These things cost too much to not be repairable.

I has a 2 year warranty. Call Alltrax see if they can add anything to the discussion.

toxicwaste29 · 05-27-2018, 02:15 PM

I found an axe controller. Put it on my 95 medalist and changed the throttle setting to its. It blinks 4 times and stays solid. The cart won’t run but clicks. Between pin 2 and 3 I get 14v but doesn’t decrease with the pedal so bad controller? Between b- and m- gets full voltage with solenoid click but doesn’t decrease either.

BobBoyce · 05-27-2018, 03:31 PM

Quote:

Originally Posted by toxicwaste29

I found an axe controller. Put it on my 95 medalist and changed the throttle setting to its. It blinks 4 times and stays solid. The cart won’t run but clicks. Between pin 2 and 3 I get 14v but doesn’t decrease with the pedal so bad controller? Between b- and m- gets full voltage with solenoid click but doesn’t decrease either.

You have an ITS throttle on a 95 Medalist? I would have thought it would be a 0-5K type throttle?

toxicwaste29 · 05-27-2018, 05:58 PM

Nope. I have the 4 pin Curtis and the its in the black box under the floor

11-16-2015, 04:40 PM	#31
Bmatlock00 Gone Wild Join Date: Apr 2012 Location: South Louisiana Posts: 386	Re: Ezgo ITS Troubleshooting I replaced my AXE4865 with an SPM48400 controller today and it looks like the problem is fixed. It is running great, but my only concern is the LED blinks RED 4 times then turns solid red when the controller powers on. It is blinking the correct sequence for the ITS except it is red instead of green. It is probably unlikely, but could the LED have been installed backwards at the factory?

11-16-2015, 04:48 PM	#32
JohnnieB Techno-Nerd Join Date: Jun 2011 Location: West Virginia Posts: 19,654	Re: Ezgo ITS Troubleshooting There have been other Alltrax controllers whose LED flashed the wrong color. Give the vendor or Alltrax a call.

11-16-2015, 04:54 PM	#33
Bmatlock00 Gone Wild Join Date: Apr 2012 Location: South Louisiana Posts: 386	Re: Ezgo ITS Troubleshooting Ok, i'll give them a call. As for the AXE4865, is there anything that can be done with it or is it garbage?

11-16-2015, 07:28 PM	#34
cgtech Over This Interview Is... Join Date: Jun 2012 Location: AZ Posts: 17,449	Re: Ezgo ITS Troubleshooting AXE is not rebuildable, its a paperweight, and maybe a stinky one.

05-27-2018, 02:15 PM	#37
toxicwaste29 Gone Wild Join Date: Aug 2014 Location: Akron, Ohio Posts: 189	Re: Ezgo ITS Troubleshooting I found an axe controller. Put it on my 95 medalist and changed the throttle setting to its. It blinks 4 times and stays solid. The cart won’t run but clicks. Between pin 2 and 3 I get 14v but doesn’t decrease with the pedal so bad controller? Between b- and m- gets full voltage with solenoid click but doesn’t decrease either.

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

05-27-2018, 05:58 PM	#39
toxicwaste29 Gone Wild Join Date: Aug 2014 Location: Akron, Ohio Posts: 189	Re: Ezgo ITS Troubleshooting Nope. I have the 4 pin Curtis and the its in the black box under the floor

Similar Threads
Thread	Forum
EZGO 48V TXT battery troubleshooting help please!	Electric EZGO
3 wheel EZgo troubleshooting	Electric EZGO
1995 EZGO troubleshooting ?	Electric EZGO
Newbie Needs help Troubleshooting 95 EZGO	Electric EZGO
troubleshooting electric ezgo	Electric EZGO