|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
07-28-2016, 12:51 PM | #11 |
Gone Wild
Join Date: Jun 2010
Location: Central Florida
Posts: 2,757
|
Re: 2007 ezgo pds no solenoid won't move
I want to say they stopped using the reed switch in either 2003 or 2004.
Question for kbiedens...... You changed "everything" ...... Did that include the charger receptacle? If so you may have installed an older unit that actually does have a reed switch in it. If you are getting full voltage on Pin 4 of the J1 connector though, then either the reed switch is working properly or you don't have one installed in your cart. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
07-28-2016, 01:03 PM | #12 |
Not Yet Wild
Join Date: Aug 2015
Posts: 17
|
Re: 2007 ezgo pds no solenoid won't move
No I didn't replace the charge receptacle it is original
|
07-28-2016, 09:42 PM | #13 | |
Not Yet Wild
Join Date: Aug 2015
Posts: 17
|
Re: 2007 ezgo pds no solinoid won't move
Quote:
|
|
07-28-2016, 09:51 PM | #14 | |
Not Yet Wild
Join Date: Aug 2015
Posts: 17
|
Re: 2007 ezgo pds no solinoid won't move
Quote:
Also in j5 ...the 3 wires coming from pedal switch I have voltage on red ...Pack volt 38 and as I push pedal I get 38 volt on green wire so I assume the pedal switch is working and the wiring is ok? |
|
07-29-2016, 07:14 AM | #15 |
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: 2007 ezgo pds no solinoid won't move
J5 is the three pin connector for the speed sensor, J4 is the four pin connector for the Pedal box (ITS sensor and pedal microswitch)
|
07-29-2016, 07:16 AM | #16 |
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: 2007 ezgo pds no solinoid won't move
|
07-29-2016, 08:31 AM | #17 |
Not Yet Wild
Join Date: Aug 2015
Posts: 17
|
Re: 2007 ezgo pds no solinoid won't move
|
07-29-2016, 09:01 AM | #18 |
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: 2007 ezgo pds no solinoid won't move
Sorry, should have said, bad pedal switch or wires, or a bad controller. I got sidetracked with the mention of checking J5.
If the red and green wire you were checking were in J4, than it appears the pedal switch is working. Since there is voltage to the solenoid coil and the coil is intact (as evidenced by the voltage on J1 Pin-6), if you get B+ (battery pack voltage) on J4 Pin-1 when the pedal is pushed and the solenoid does not click, the controller is bad. |
07-29-2016, 12:29 PM | #19 | |
Not Yet Wild
Join Date: Aug 2015
Posts: 17
|
Re: 2007 ezgo pds no solinoid won't move
Quote:
|
|
07-29-2016, 12:34 PM | #20 | |
Not Yet Wild
Join Date: Aug 2015
Posts: 17
|
Re: 2007 ezgo pds no solinoid won't move
Quote:
OK so what,is knocking out the controller.... this will be the second one I've put in they are not cheap |
|
|
|
Similar Threads | ||||
Thread | Forum | |||
2007 ezgo wont move | Electric EZGO | |||
EZGO solenoid clicks and won't move is it F/R switch? | Electric EZGO | |||
95 Ezgo 36v shuttle 6 solenoid clicks wont move | Electric EZGO | |||
97 or 98 EZGO TXT won't move, solenoid clicks | Electric EZGO | |||
91 ezgo solenoid clicks, wont move | Electric EZGO |