Aluminium Rocker Panels

[Pyro62]

Does anybody have a good source for replacement EZ GO Aluminium Rocker panels for the S4, S6/L6 and the Hauler 800? The S4 and hauler 800 may use the same panels? Many thanks.

[FF Titus]

They dont. The hauler series is a different body than that of the S4. They come steel from the suppliers. I have many in stock, but it can get tricky. I've spent hours doing paperwork with ezgo when ordering rocker panels. They'll send me the "right" one, only to find out it's a mile off and wont fit. Just post what you need and I can get you a P/N.

[Pyro62]

Thanks FF Titus, But I am looking for somebody than can make them in aluminum.

[BrewCityMusic]

if you're talking aluminum diamondplate, they would be easy to fab up yourself - go on eb*y and order some 2.5" corner diamondplate in .063 (2pcs x 3ft should do it) then trace out what you need and make the cuts with a fine metal blade w a jigsaw, clean up any burrs and drill the mounting holes, done ... I've seen steel of course but you're right, they're hard to find in diamondplate if You want 'em shiny

[Pyro62]

Thanks bud, I may just try that.