|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
03-07-2017, 06:51 PM | #11 |
Not Yet Wild
Join Date: Apr 2016
Location: Vero Beach, Florida
Posts: 26
|
Re: 2010 ezgo txt 48v no solenoid click no movement
Replaced the pedal switch just to rule it out. Made no difference. Yes, this does have the 4 pin connector between the pedal switch and harness. Working on tracing the green wire now.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
03-07-2017, 08:37 PM | #12 |
Not Yet Wild
Join Date: Apr 2016
Location: Vero Beach, Florida
Posts: 26
|
Re: 2010 ezgo txt 48v no solenoid click no movement
JohnnieB you're the man! I went through every wire on the harness and by chance I happened to press the pedal while I was messing around with the wires near that inline connector you mentioned and the solenoid engaged and the cart moved forward. Looking into it further I found that when I put pressure on the inline connector a specific way, everything would engage and function normally. Disassembled the connector, cleaned and reshaped the contacts. Now it works like a charm. I appreciate the thorough info as it lead me to finding the problem. After 3 days of testing voltage, etc. and racking my brain, I owe you many thanks. You are a guru!
|
03-08-2017, 09:29 AM | #13 |
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: 2010 ezgo txt 48v no solenoid click no movement
Glad you got it working.
|
03-08-2017, 08:04 PM | #14 |
Not Yet Wild
Join Date: Apr 2016
Location: Vero Beach, Florida
Posts: 26
|
Re: 2010 ezgo txt 48v no solenoid click no movement
Thanks again!
|
03-25-2017, 11:17 PM | #15 |
Gone Wild
Join Date: Feb 2015
Location: Myrtle Beach S.C
Posts: 151
|
Re: 2010 ezgo txt 48v no solenoid click no movement
I am haveing the same problem my cart is stock. But I can unplug and plug the 4 pin connecter back in a now it takes off in foward and stops. No reverse thinking I should get whole new wire harness for pedal switch ????
Sent from my SM-G925T using Tapatalk |
03-25-2017, 11:18 PM | #16 |
Gone Wild
Join Date: Feb 2015
Location: Myrtle Beach S.C
Posts: 151
|
Re: 2010 ezgo txt 48v no solenoid click no movement
Sent from my SM-G925T using Tapatalk |
03-26-2017, 07:33 AM | #17 |
Gone Wild
Join Date: Dec 2009
Location: Aiken, SC
Posts: 13,188
|
Re: 2010 ezgo txt 48v no solenoid click no movement
Could be either side of the harness so just cut the plug out and splice it preferably with solder and heat shrink
|
03-26-2017, 04:33 PM | #18 |
Gone Wild
Join Date: Feb 2015
Location: Myrtle Beach S.C
Posts: 151
|
Re: 2010 ezgo txt 48v no solenoid click no movement
Hard wired those wires and still same thing. If I pull off the black wire in the pedal switch box and put it back on it will jump foward and still no reverse. ?
Sent from my SM-G925T using Tapatalk |
03-27-2017, 08:20 AM | #19 | |
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: 2010 ezgo txt 48v no solenoid click no movement
Quote:
Your cart appears to have at least two problems, or a bad controller. 1. The black wire in the pedal box is the ITS (throttle) signal to the controller and is not effected by direction of cart travel nor does it have any effect on determining the direction of cart travel. 2. No reverse is either the controller isn't being told which direction to send amps through the field windings, or it is being told and isn't doing what it is being told to do. Attached is a service manual for a TXT-48. Page E-10 tells how to check the ITS sensor. Also attached are a schematic and a wiring diagram for the manual. When in Forward, you should nave full battery pack voltage on Pin-8 and in Reverse it should be on Pin-16. If both of those check out okay, your controller might be bad. Someone with the handheld programming tool can access the error codes and make a more accurate determination of the controller's health. |
|
Tags |
48v, ezgo, solenoid, troubleshoot, txt |
|
|
Similar Threads | ||||
Thread | Forum | |||
2010 ezgo rxv no click from solenoid no reverse beep doesn't move | Electric EZGO | |||
2003 g22E no movement or solenoid click | Electric Yamaha | |||
1995 48v DS no solenoid click & no movement intermittently | Electric Club Car | |||
2005 CC DS 48V Solenoid Click, slight movement then nothing | Electric Club Car | |||
48V DS Solenoid Click, 0 movement | Electric Club Car |