Can anybody help with club car hooking up an alltrax controller?

[scottyb]

Originally Posted by Phayes

The green light flashes one time then goes green

Houston, we have a problem. And an easy solution.
Can you download the software to your laptop and connect to the controller with a printer cable (usb 1>usb2)

The toolkit software is here > http://www.alltraxinc.com/Products_SR.html
The toolkit manual is here > http://www.alltraxinc.com/files/Doc1...kit-Manual.pdf


Please change ONLY the throttle type setting to 0-5v. Then hit the gray 'set' tab and wait for the now blue tab to turn back to gray again before closing the program.
It does appear I had a program error and did not 'set' my selection.

[Phayes]

I will do that....but an important question? how many volts should be going through the ignition switch to the accelerator pedal...reason I ask is if it is a 0-5v pedal...what should we have going to it?

[Sergio]

It looks like Scottyb is using a solid state throttle like the "HXJS-4805" Hall-effect unit.

They use a power source of 36v-80v (red wire) but produce a 0-5v output (green wire).

Just make sure You connect the wires according to his diagram.

[Phayes]

I want to Thank you guys for helping me out with my issue...Much appreciated!!!...Going into the programming and setting the input from the pedal fixed it...This forum is great and Scotty B. I will be ordering that updated F/R switch soon...Thanks again!!

[Bobbob]

Originally Posted by Mooncarter

Yes, all of that. Even burn down the neighborhood. But, if you do what Sergio said to do above, the worst that can happen is you will have to swap the 2 wires on the FNR switch.

Sent from my iPad using Tapatalk

[scottyb]

I apologize for the trouble I caused here. Today I found the glitch in my saved program which changed the throttle type when I loaded the fancy curve.
Glad you were such a good sport about it all - there is always a learning curve with a new kit.

[Phayes]

It's all good Scotty...I did pull my hair out for 5 hours going over the wiring several times and I knew I had it right...LOL...it's cool though...the main thing is the people here worked together and it's fixed...runs like NEW!!

[yawood]

Those dang software bugs.