05-15-2017, 08:16 PM | #1 |
Gone Wild
Join Date: Feb 2015
Location: Myrtle Beach S.C
Posts: 151
|
Ele club car
Will a fiberglass body off of a 1983 club car fit on a 1998 club car ? 98 has plastic body now.
Sent from my SM-G925T using Tapatalk |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
05-15-2017, 08:37 PM | #2 |
Gone Wild
Join Date: Sep 2015
Location: Cincinnati, Ohio
Posts: 1,354
|
Re: Ele club car
I think the only difference (other than fiberglass to plastic) was the cowl being different on the newer ones.
|
05-15-2017, 09:03 PM | #3 |
Gone Wild
Join Date: Aug 2009
Posts: 14,245
|
Re: Ele club car
Yes it should fit no problem, but the ArmorFlex (plastic) body is superior.
|
05-15-2017, 09:05 PM | #4 |
revolutiongolfcars.com
Join Date: Mar 2010
Location: Golf Car Capital of The World... Augusta, Georgia
Posts: 10,224
|
Re: Ele club car
The cowl won't fit correctly. The newer cowls will go on the older frames if you use a 1/4" spacer underneath the cowl where the canopy frame bolts attach to it. If you try to put a fiberglass cowl on a newer frame that doesn't require the spacer it's going to sit too tall and will cause the cowl not to seat properly at the bottom of the aluminum cowl trim, unless you force it. Then you're at a risk of the fiberglass cracking due to excess stress.
|