2009 club cart with Alltrax xct 300 controller throttle issue

[Mr.Mongoose]

We recently purchased an Alltrax controller and a new Admiral mot-02 controller for my 2009 club cart. The big issue we are having is the throttle calibration seems to be off. After pushing in the pedal around 10-20% I am at max throttle according to the the monitor on the Alltrax tool-kit. I will attach a screenshot of the lowest throttle reading I could get by barely pressing in the pedal. Any help would be appreciated.

[NoleFan4Ever]

Did you purchase that from Carts Unlimited or Revolution Golf Cars? I ask because scottyb and David usually pre-program them for you so they match up and are ready to go out the box.

And the new XCT controllers are super easy for self-calibrating with MCOR's. That is supposed to be one of their best attributes.

If you did not buy from one of them, please check your program as the MOT-A2 has its very own map right from Alltrax that is set up to work best with that motor.

And one of them may see this and offer more advice.