|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
11-29-2017, 07:37 PM | #1 |
Not Yet Wild
Join Date: Nov 2017
Location: metro detroit
Posts: 16
|
rxv a-arm bushings
cant seem to find the these bushings, any help? the ones in red
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
11-29-2017, 08:58 PM | #2 |
Gone Wild
Join Date: Feb 2016
Posts: 228
|
Re: rxv a-arm bushings
As far as I can tell they are only available as part of the A arm assembly.
|
11-29-2017, 11:00 PM | #3 |
Getting Wild
Join Date: Mar 2017
Location: Windsor, Co
Posts: 110
|
Re: rxv a-arm bushings
I ordered one from ezgo, they are assembled with the a arm. You might call their support number and see if they sell them separate, might only be able to order them separately from a dealer
|
11-30-2017, 07:51 AM | #4 |
Gone Insane
Join Date: Oct 2015
Location: TN/NC/GA Tri-state area
Posts: 3,952
|
Re: rxv a-arm bushings
They come with a new A-Arm from E-Z-GO, but all the new ones are plastic and they have a lot of slop. I went to a shop that sells and repairs riding mowers and garden tractors. They were able to match up some bronze bushings that were a much better fit.
I made a post back then that showed the bags with the manufacturers markings. I don't know when I posted it, I think it was last year. The bronze bushings were a better fit with SAE bolts in place of the metric bolts E-Z-GO had switched to. I used grade 8 bolts from Tractor Supply. They hold up better. I also replaced the metric kingpin bolts with SAE to tighten up the factory slop in the kingpin area. I had to ream the kingpin inner hole slightly to get it to fit tightly. I'm a retired areospace engineer so I'm very picky about things such as steering and brakes. Bob |
11-30-2017, 08:01 AM | #5 |
Gone Wild
Join Date: Mar 2014
Location: NE Indiana & SW Florida
Posts: 3,221
|
Re: rxv a-arm bushings
Here is Bob's bushings he bought I saved his picture.
|
11-30-2017, 08:38 AM | #6 |
Gone Insane
Join Date: Oct 2015
Location: TN/NC/GA Tri-state area
Posts: 3,952
|
Re: rxv a-arm bushings
|
12-12-2017, 09:02 PM | #7 |
Not Yet Wild
Join Date: Nov 2017
Location: metro detroit
Posts: 16
|
Re: rxv a-arm bushings
|
01-31-2021, 10:58 PM | #8 |
Not Yet Wild
Join Date: Jul 2020
Location: Swampland Louisiana
Posts: 66
|
Re: rxv a-arm bushings
More great info -- thanks, I will order these and replace mine too!
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Bushings for g-8 | Electric Yamaha | |||
Bushings | Electric EZGO | |||
Leaf spring bushings, do they make polyurethane bushings? | Gas Club Car | |||
Bushings all around.... | Electric Club Car | |||
Bushings | Electric EZGO |