03-27-2020, 10:55 AM | #1 |
Not Yet Wild
Join Date: Jun 2013
Posts: 20
|
2pg motor wont run
have a 2pg motor that refuses to run. i have installed a new top end(140-145 compression) new crank seals, new carb and fuel pump(completely removed gas tank for cleaning added new gas). hei conversion (good blue spark). still cant get it to sputter.
im lost at what to try next. i got one sorta sputter from spraying starter fluid in the jug but nothing after that. the muffler is currently off the motor and i see plenty of gas coming out of the jug and the plug is also soaked. maybe spark idk im currently pulling my hair out trying to figure this one out. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
03-27-2020, 02:35 PM | #2 |
Test before replacing
Join Date: Aug 2013
Location: Ohio side of the Pennsylvania border.
Posts: 3,489
|
Re: 2pg motor wont run
That compression is way too high. It's a sign that the piston is in backwards.
Remove the exhaust pipe. Look in the port, and move the piston up, and down. If you see a square hole in the side of the piston on the exhaust side, it's backwards. |
04-04-2020, 09:46 AM | #3 |
Not Yet Wild
Join Date: Jun 2013
Posts: 20
|
Re: 2pg motor wont run
Already did that and no I dont see a port
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Motor wont stop | Electric EZGO | |||
48v to 36v motor wont run | Electric Club Car | |||
Motor wont stop | Gas Club Car | |||
New motor and cart wont go | Electric EZGO | |||
Motor turns but wont go! | Electric Club Car |