|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
08-22-2020, 01:29 PM | #1 |
Not Yet Wild
Join Date: Jul 2020
Posts: 9
|
Input Shaft Part Help! JR6-G6320-01-00 SHAFT, INPUT ASSY
So I ordered the g14-g22 replacement shaft for my Yamaha Pro Hauler with a G21A engine. When the new shaft arrived It wouldn't install correctly with the existing gear placement.
After a closer inspection the, part I recieved wasn't a match. The rear gear on the shaft is larger and won't allow the F gear to be installed. I have been all over the net looking for JR6-G6320-01-00 SHAFT, INPUT ASSY and can't find it. It says the part is discontinued. Any help would be appreciated. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
08-22-2020, 01:52 PM | #2 |
Sometime's............
Join Date: Oct 2007
Location: Tacoma Washington
Posts: 11,868
|
Re: Input Shaft Part Help! JR6-G6320-01-00 SHAFT, INPUT ASSY
Bear in mind I've been retired for a while from the Yamaha golf car gig. As I remember/ recall, if you are trying to use a JN3 input shaft into a JR6 transaxle, you will need a JN3-G6326-00-00 forward gear for it to work. Forward will be faster because the input shaft and forward gear where desighned for lower speeds in the utility vehicles. Hope that's right and helps you get your ride going again
|
08-22-2020, 03:40 PM | #3 | |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: Input Shaft Part Help! JR6-G6320-01-00 SHAFT, INPUT ASSY
Quote:
|
|
08-23-2020, 11:34 AM | #4 |
Not Yet Wild
Join Date: Jul 2020
Posts: 9
|
Re: Input Shaft Part Help! JR6-G6320-01-00 SHAFT, INPUT ASSY
|
08-23-2020, 11:59 AM | #5 |
Sometime's............
Join Date: Oct 2007
Location: Tacoma Washington
Posts: 11,868
|
Re: Input Shaft Part Help! JR6-G6320-01-00 SHAFT, INPUT ASSY
Click on site sponsors ....
|
08-23-2020, 02:16 PM | #6 |
Not Yet Wild
Join Date: Jul 2020
Posts: 9
|
Re: Input Shaft Part Help! JR6-G6320-01-00 SHAFT, INPUT ASSY
Okay so if I order the JN3-G6326-00-00 F Gear/Gear 1 I should be able to use the existing input shaft JN3-G6320-01-KT I purchased. Should I call Plowmans for verification this will work or to see if he has my original JR6 input shaft?
Man just that gear is 230 to 260 bucks...jeeze. |
08-24-2020, 06:08 AM | #7 | |
maintaining a low profile
Join Date: Oct 2009
Location: SW Virginia USA
Posts: 6,313
|
Re: Input Shaft Part Help! JR6-G6320-01-00 SHAFT, INPUT ASSY
Quote:
|
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Part Number Help, Please - Input Shaft Seal | Electric EZGO | |||
Input shaft kit for 94 Marathon-part #? | Electric EZGO | |||
EZGO Rear differential input shaft nut crimped? how to remove input shaft?! | Gas EZGO | |||
chain drive input shaft sprocket assy | Golf Carts and Parts | |||
input shaft o-ring part number | Electric EZGO |