|
|
|||||||
| Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
  |
|
|
Thread Tools | Display Modes |
10-08-2020, 04:39 PM
|
#1 |
|
Gone Wild
Join Date: Nov 2008
Posts: 370
|
G1 battery tray
Does anyone make a replacement battery tray? Is so where?
Thanks, Bryan |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
10-09-2020, 07:07 AM
|
#2 |
|
Searching for The Way
 Join Date: Oct 2009
Location: Medina, Ohio (NEOHIO)
Posts: 11,441
|
Re: G1 battery tray
I don't believe so. What I did is I found someone who had a full cart they were parting out, it was from the south so it was rust free. I had the guy section out the battery tray with rocker and all and I cut and welded it into my cart. Worked great and it didn't take much work at all, maybe an hour or two. You do have to have a little fab and welding skill, but not a high level. Honestly that repair was one of my first projects with Harbor Freight welder. It's still in the cart after 10 years.
On mine, I also used a plastic battery tray under the battery as a hold down. They can be purchased at an auto parts store. It bolts down with 1/4" fasteners very easily. Use J bolt type battery hold down kit with it and your battery will never move or slide around again.  |
|
|
|
|
10-10-2020, 07:58 PM
|
#3 |
|
Getting Wild
Join Date: Jul 2020
Posts: 75
|
Re: G1 battery tray
I’ve used an old gas grill door, it’s already got 2 sides, just cut the other 2 an inch longer & then bend them up.
|
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Battery tray | Electric EZGO | |||
| RXV Battery Hold Downs for 6 battery tray holder | Electric EZGO | |||
| DS Battery Tray Repair - Battery Storage | Electric Club Car | |||
| painting battery tray, battery order?, 97 36v DCS | Electric EZGO | |||
| Battery Tray | Design Center | |||
Linear Mode
