|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
06-08-2021, 05:09 PM | #1 |
Not Yet Wild
Join Date: Oct 2020
Posts: 13
|
Grinding when trying to drive - g9
Hey everyone! I have a 92 G9. If you’ve ever ran your cart in neutral then slammed it into gear, this is the noise that it makes when I press the gas with the cart in drive. It will do that until the engine stops spinning then it like - catches and starts going. Not sure if it’s relevant, I’m very new to working on these but there are two new clutches, well they have one season on them anyways
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
06-08-2021, 08:03 PM | #2 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: Grinding when trying to drive - g9
I bet the axle is trash. What happens is sometimes the governor fork comes loose, and then goes marauding around the transmission leaving destruction in its wake.
|
06-08-2021, 08:52 PM | #3 |
Not Yet Wild
Join Date: Oct 2020
Posts: 13
|
Re: Grinding when trying to drive - g9
|
06-09-2021, 12:22 AM | #4 |
Getting Wild
Join Date: Apr 2021
Location: Past where the pavement ends
Posts: 86
|
Re: Grinding when trying to drive - g9
Try adjusting the cables so that it has more engagement. Also check the springs at end of cables. Oh and no more neutral drops😆
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Drive wheel grinding bad all the time G14E. | Electric Yamaha | |||
08 Yamaha drive grinding between reverse and drive | Gas Yamaha | |||
2011 G29 Drive Grinding Brake | Electric Yamaha | |||
Drive Clutch-Noisy/Grinding?? | Gas Club Car | |||
2007 drive rear end grinding with pics | Electric Yamaha |