08-28-2021, 12:04 PM | #11 |
Getting Wild
Join Date: Aug 2012
Location: Bradenton Fl
Posts: 93
|
Re: 295 mci no power
I pulled the new plugs and both are black. Thinking either weak spark or the china carb is no good.
https://www.ebay.com/itm/ezgo-295-35....m46890.l49286 Is this one actually oem? |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
08-28-2021, 12:32 PM | #12 |
Getting Wild
Join Date: Aug 2012
Location: Bradenton Fl
Posts: 93
|
Re: 295 mci no power
I put a spark board on it. It didn't want to jump a 1/4 gap. Also the coil is smaller then the mounting bracket, only one bolt is in it, so I think it might be the wrong one
|
08-28-2021, 01:03 PM | #13 | |
Vintage tech
Join Date: Sep 2009
Location: South
Posts: 3,216
|
Re: 295 mci no power
Quote:
That is if this is just a picture and not actually the part you are buying. His feedback is low for some reason but it don't show why. Positive Feedback (last 12 months): 98.3% is sort of red flag to me . The number 5 is on the OEM's I have here and the china ones have nothing on them. I have a box full of used one both OEM and china ones. China ones have nothing at all stamped on them. If you look inside of choke plate you will see a 13 or 15 stamped but the picture don't show that. Pre Mci engines use the 15 mm venturi and MCI engines used the 13 mm venturi . MCI carbs are supposed to work on Pre Mci engines but I have found the MCI with 13 mm venturi don't run as good as the ones with 15mm. The ones I tried ran rich. I also tried different jet sizes but again that was just me. Ask the seller to verify if this carburetor has the number 5 stamped on the choke plate and 15 inside past the choke plate. Sure is cheap because the dealers want $160 for these now. If indeed they are OEM I would buy two today. The OEM coils have a + and - stamped where you plug the red and white wires on it. Aftermarket have nothing on them. I can tell you from all the years working on these engines that the cheap coils will fire but tend to spit back through the carb when you hit the gas pedal. Fire is weaker I did include a picture so you know what to look for with these coils and carbs to tell the difference between cheap and OEM . The cheap coil is the one that has the white area. OEM has plus and minus stamped where you can see it . You can also see very plain the OEM carb has a number 13 on the one I uploaded which is a MCI carburetor. At least that's what I have discovered. Good luck |
|
08-29-2021, 08:34 AM | #14 |
Getting Wild
Join Date: Aug 2012
Location: Bradenton Fl
Posts: 93
|
Re: 295 mci no power
So the carb I have off the 350 has a 13 on the inside, but im going to need jets. They are mangled. Where can I get some jets for it?
I'm just going to go ahead and get a new coil. Is the hei coil conversations worth it? |
08-29-2021, 12:57 PM | #15 | |
Vintage tech
Join Date: Sep 2009
Location: South
Posts: 3,216
|
Re: 295 mci no power
Quote:
Here is what I was referring to when I made the post about 13 vs 15 mm carbs |
|
08-29-2021, 06:54 PM | #16 |
Getting Wild
Join Date: Aug 2012
Location: Bradenton Fl
Posts: 93
|
Re: 295 mci no power
So the coils I see for the mci engines have a plug on the bottom. Is the ones with the 2 spades for pre mci?
|
08-29-2021, 07:22 PM | #17 | |
Vintage tech
Join Date: Sep 2009
Location: South
Posts: 3,216
|
Re: 295 mci no power
Quote:
I just tried to edit this post and lost what I posted. More later as I just got home from my shop and I am too tired tonight to try and help |
|
08-29-2021, 08:17 PM | #18 |
Getting Wild
Join Date: Aug 2012
Location: Bradenton Fl
Posts: 93
|
Re: 295 mci no power
So the coil I have now has the spades, not the plug. And it's to small for the bracket, only one bolts holding it on
It has a new china carb now. But I have a oem mci 350 carb but the jets mangled and the wrong one. I haven't pulled the driven clutch apart yet, but when I drove it without the seat the belt appeared to be where it should at wot, and the carb was all the way open. |
08-29-2021, 08:23 PM | #19 | |
Vintage tech
Join Date: Sep 2009
Location: South
Posts: 3,216
|
Re: 295 mci no power
Quote:
Has someone been chopping on wires in order for this pre mci coil to work. I will try and look at this tomorrow. Working 8 hours today has just about whooped me :) |
|
08-29-2021, 08:29 PM | #20 | |
Getting Wild
Join Date: Aug 2012
Location: Bradenton Fl
Posts: 93
|
Re: 295 mci no power
Quote:
|
|
|
|
Similar Threads | ||||
Thread | Forum | |||
"78 club car looses power, stutters at full power. | Electric Club Car | |||
Diagram for switched 48 volt power and relay to fused power block? | Electric Club Car | |||
1995 ezgo medalist power, new batteries, no power to the solenoid | Electric EZGO | |||
2005 Precedent starts of powered, then loses power, reverse always power | Electric Club Car | |||
Power Wise Charger worked after board replaced now back to no power | Electric EZGO |