|
Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
01-10-2011, 08:01 AM | #1 |
Not Yet Wild
Join Date: Oct 2010
Location: Cumming, GA
Posts: 18
|
90 Marathon Dash Removal
Ok, Ive always prided myself on being able to get things apart, its the getting them back together is the problem sometimes.
I have a 90 Marathon (gas) that im working on, and I cant figure out how to get the dash board plastic tray out. I took the cupholder center console off, but I cant see anyway to get the tray out without taking the entire cart apart...what am I missing. Im a Noobie to carts so dont heckle me to bad |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
01-10-2011, 08:27 AM | #2 |
no clue
Join Date: Sep 2009
Location: spicewood, texas
Posts: 3,308
|
Re: 90 Marathon Dash Removal
welcome td. try looking in the stickies at the top of the ezgo elec. section. it may help
jim |
01-10-2011, 08:47 AM | #3 |
Gone Wild
Join Date: Jun 2008
Location: Raytown, Missouri
Posts: 894
|
Re: 90 Marathon Dash Removal
Hi tdcanada, When I took mine out it was a hot day and used a hair drier to heat the plastic, then it will bend with out breaking to pull out, they are a tight fit. Good Luck
|
01-10-2011, 09:42 AM | #4 |
Getting Wild
Join Date: Sep 2010
Location: Vermont
Posts: 105
|
Re: 90 Marathon Dash Removal
On my 88 there are two rivets just behind the cup holder assy. holding the tray down. They need to be removed. Then the tray will lift up and come out. It is a tight fit.
|
01-10-2011, 09:53 AM | #5 |
Getting Wild
Join Date: Apr 2010
Location: North Texas
Posts: 120
|
Re: 90 Marathon Dash Removal
http://www.buggiesgonewild.com/elect...l-removal.html
Here is the stickey on the removal... Good Luck, and Welcome to BGW! |
01-11-2011, 12:54 AM | #6 |
Not Yet Wild
Join Date: Oct 2010
Location: Cumming, GA
Posts: 18
|
Re: 90 Marathon Dash Removal
Thanks everyone for the info, that is what it lookd like to me, although I had no clue about the rivets. The front cowl was so badly damaged, that I just ripped it off, but I had no clue how I was going to get a new one back on. I was thinking of putting some threaded inserts or something when I installed the new cowl. There is not a threaded hole on this cart!
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Dash panel removal | Gas EZGO | |||
95 Medalist dash removal | Gas EZGO | |||
newbie: seat belts, dash lights, removal | Design Center | |||
Marathon Dash | Electric EZGO | |||
Marathon Dash | Gas EZGO |