Toe in 2006 Presedent

jlmurphy · 11-30-2011, 08:02 PM

My right side tire is showing alot of wear. The left side not as much the cart has a Jakes 6inch lift. What should the toe in be set at.

Colbyntx · 11-30-2011, 09:37 PM

Streight!

Sorry Jim, I couldn't help it! Are you running on an oval track?

jlmurphy · 12-01-2011, 07:43 AM

Well maybe I am running the wrong way

Down South · 12-01-2011, 02:26 PM

I never set the toe in on a Jakes Lift but I have set toe in for an AllSports. On a level concrete slab or deck with the wheels straight “Not turned”, use a framing square to check from top of the tire side wall to the bottom of the tire side wall with the square resting on the deck. You should have about 1/8” clearance on the lower side wall with the framing square resting flat on the slab or deck. I’m not sure if Jakes has an adjustment for this but it should. Adjust both tires as needed.

Now check the toe in. Tow in should be about 1/8”-3/16” less on the front of the inside tire side wall compared to the rear inside tire sidewall. This measurement is taken half way up the tire. If the measurement is incorrect. Loosen both tie rod ends and adjust both sides the same to get the correct measurement.

Hope this helps.

11-30-2011, 08:02 PM	#1
jlmurphy Gone Wild Join Date: Nov 2010 Location: East to Southeast,Texas Posts: 187	Toe in 2006 Presedent My right side tire is showing alot of wear. The left side not as much the cart has a Jakes 6inch lift. What should the toe in be set at.

11-30-2011, 09:37 PM	#2
Colbyntx Gone Wild Join Date: Jun 2010 Location: East Texas Posts: 602	Re: Toe in 2006 Presedent Streight! Sorry Jim, I couldn't help it! Are you running on an oval track?

12-01-2011, 07:43 AM	#3
jlmurphy Gone Wild Join Date: Nov 2010 Location: East to Southeast,Texas Posts: 187	Re: Toe in 2006 Presedent Well maybe I am running the wrong way

12-01-2011, 02:26 PM	#4
Down South Growing In Grace Join Date: Aug 2011 Location: Retired now and back home in Louisiana Posts: 6,301	Re: Toe in 2006 Presedent I never set the toe in on a Jakes Lift but I have set toe in for an AllSports. On a level concrete slab or deck with the wheels straight “Not turned”, use a framing square to check from top of the tire side wall to the bottom of the tire side wall with the square resting on the deck. You should have about 1/8” clearance on the lower side wall with the framing square resting flat on the slab or deck. I’m not sure if Jakes has an adjustment for this but it should. Adjust both tires as needed. Now check the toe in. Tow in should be about 1/8”-3/16” less on the front of the inside tire side wall compared to the rear inside tire sidewall. This measurement is taken half way up the tire. If the measurement is incorrect. Loosen both tie rod ends and adjust both sides the same to get the correct measurement. Hope this helps.

Similar Threads
Thread	Forum
07 presedent buzzer stays on	Electric Club Car
Best price for 6" Allsports A-arm lift for CC Presedent	Lifted Golf Carts
Presedent	Electric Club Car
Starting problems on my Presedent	Gas Club Car
2005 presedent IQ cart Problem	Electric Club Car

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum