|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
08-03-2018, 03:30 PM | #1 |
Gone Wild
Join Date: Jun 2018
Location: Kersey Pennsylvania
Posts: 437
|
Cable install please help
Installing the new controller is a bit more complex than I thought. The controller part not so bad but the new battery cables came with 11 cables that’s 2 extra as far as I can see. Is it for the precedent with the onboard computer. Does anyone have pics of the cable install. It looks like the extra ones are very long. It came with a long red cable I assume it’s the positive to solenoid. And one small green cable about 5” long the other 9 are black all different sizes. Please help thanks Jerry
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
08-03-2018, 03:40 PM | #2 |
Gone Wild
Join Date: Jan 2017
Location: Miami, FL
Posts: 1,061
|
Cable install please help
11 is what you need if using the stud kit for the stock OBC. Otherwise you only need 10.
5-connect 6 batteries together in series 2-controller B+ and M- to motor A2 and A1 respectively 1-pack negative to controller B- 1-pack positive to solenoid big post 1-other solenoid big post to controller B+ If you have the OBC stud kit, the pack negative goes to one side of the stud and the 11th wire goes from the other side of the stud to the controller B- Edit: the 2 extra long cables are probably the motor cables. |
08-03-2018, 05:25 PM | #3 |
MOD of all BS!
Join Date: Sep 2011
Location: Florida
Posts: 17,477
|
Re: Cable install please help
And on all those black ones you are referring too, they should have color coordinated heat shrink or tape on them to match the color cable you are replacing...
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Yamaha G1 throttle cable install | Gas Yamaha | |||
F-n-R cable install on 2011 sport 2+2 gas | Gas EZGO | |||
battery cable install | Electric EZGO | |||
G22 accelerator cable install | Gas Yamaha | |||
G16 Accelerator Cable Install | Gas Yamaha |