|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
12-06-2010, 12:06 AM | #11 |
Not Yet Wild
Join Date: Dec 2010
Posts: 17
|
Re: 94 EZGO DCS? PDS? or what
Ok not sure what it is called it`a black box with 4 lugs coming out the top and a solenoid on the front.
I think the Forward & Reverse switch is mounted across from this toward the dash. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
12-06-2010, 12:26 AM | #12 |
Gone Wild
Join Date: Jun 2010
Location: Central Florida
Posts: 2,757
|
Re: 94 EZGO DCS? PDS? or what
you have the original speed controller. They had 4 lugs on the top. The 4th lug went to the A2 (via the F&R switch) to allow for "plug braking". The newer carts eliminate the "plug braking" so only require 3 lugs on top of the controller.
|
12-06-2010, 03:04 PM | #13 |
Not Yet Wild
Join Date: Dec 2010
Posts: 17
|
Re: 94 EZGO DCS? PDS? or what
speed controller! OK thanks for that info!
I got all the batteries clean up and reinstalled, I`ve got 36 volts and Charger seems to work, But no go. all suggestions welcome |
12-06-2010, 03:13 PM | #14 |
Not Yet Wild
Join Date: Dec 2010
Posts: 17
|
Re: 94 EZGO DCS? PDS? or what
well just printed out Diagnostic testing guess I`ll give that a try, and see what I figure out.
|
12-09-2010, 12:16 PM | #15 |
Not Yet Wild
Join Date: Dec 2010
Posts: 17
|
Re: 94 EZGO DCS? PDS? or what
Ok I replaced solenoid, resistor, and diode. still no go! I`m thinking maybe something to do with the pedal box now, guess I`ll trace down the wires to it and make sure they are right,first and go from there.
Oh, also when I first connect the ground to battery pack I get a pretty good arc and then seems to be ok. Is this normal,or maybe caused by short or wire in the wrong spot? Any help or suggestions very much appreciated, Very new to working on these. Thanks |
12-13-2010, 04:32 PM | #16 |
Not Yet Wild
Join Date: Dec 2010
Posts: 17
|
Re: 94 EZGO DCS? PDS? or what
Alright, got her going. 4 pin connector between pedal and speed controller was faulty. Took a while but found it and replaced with terminals I had. Need to get a micro switch for reverse and I think I`m good to go.
Thanks for the help guys. I have a broken leaf spring too, not sure how I`m going to fix it. Don`t have a lot to spend on it right now. Anyway Thanks!! |
12-13-2010, 04:51 PM | #17 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,358
|
Re: 94 EZGO DCS? PDS? or what
Glad to see you got it running with a little help from a wiring diagram.... No fix for the spring just replacement.... How many leafs in the spring set. I might have an old half set laying about?
|