|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
11-19-2020, 08:23 PM | #101 |
Not Yet Wild
Join Date: Jun 2015
Posts: 8
|
Re: Bad boy buggy problem shifting out of 4 wheel drive
Weird spinning of my wheels on this problem. While testing the throttle sensor I'm not showing any notable change in resistance over the range of motion between any of the 3 terminals. Between about 24kOhm and 34kOhm on every possible combination with no change over the sweep of motion. Weird, but I'd think definitely indicative of a failed sensor? Unless the resistance change is very small and my meter isn't up to the task.
Also, between frame ground and the plug for the throttle sensor, I'm showing 21V at on the center, 11V on one side, and 16V on the other. I know carts have weird frame voltages at times, but this seemed quite strange to me for what I believe is a 0-5V sensor. Would sure love a little help if everyone else hasn't just totally given up on this. Everything involved in my troubleshooting here is EZGO components. It's the white capped "normal looking" throttle position sensor. And to note once again, the cart reacts and drives perfectly, sans the code 2,3 -- and the rearend direction change actuator not actuating. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
11-19-2020, 10:00 PM | #102 |
Not Yet Wild
Join Date: Jun 2015
Posts: 8
|
Re: Bad boy buggy problem shifting out of 4 wheel drive
It really still doesn't make sense to me though. The cart obviously doesn't move at all in electric mode with the sensor unplugged but I still only get code 23. But with the sensor plugged in, it acts totally normally in electric mode which I interpret as the sensor being read correctly by the electric controller. So weird.
|
11-20-2020, 02:35 PM | #103 |
Not Yet Wild
Join Date: Jun 2015
Posts: 8
|
Re: Bad boy buggy problem shifting out of 4 wheel drive
Well, now that I actually removed the sensor in order to test it, the electric side no longer works either and I'm DOA. Still with a code 23.
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
2009 Ymamha Drive G29 shifting and sluggish | Gas Yamaha | |||
Shifting problem | Gas Club Car | |||
2001 Club Car shifting problem | Gas Club Car | |||
I have a 48 volt 4 wheel drive 2003 bad Boy buggy ( Dont laugh Please) | Lifted Golf Carts | |||
98 Workhorse shifting problem | Gas EZGO |