|
|
|||||||
| Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
07-08-2018, 12:04 PM
|
#1 |
|
Not Yet Wild
Join Date: Jul 2018
Posts: 2
|
2011 rev motor brake
Bought a replacement motorbrake, plugged into power on the cart to allow me to center, but nothing, no indication of power, not able to center as video would indicate.
Any suggestions |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
07-08-2018, 12:12 PM
|
#2 |
|
Not Yet Wild
Join Date: Jul 2018
Posts: 2
|
Re: 2011 rxv motor brake
Bought a replacement, upgraded RELIANCE motorbrake from this web site.
Video shows hooking it up to power to center, i hook it up to the cart, no indication of power, unable to center? |
|
|
|
|
07-08-2018, 02:29 PM
|
#3 |
|
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: 2011 rev motor brake
Return all the aftermarket BS, buy a OEM brake, and not the HD OEM brake if your Rxv is 2012 or older. Never had a single aftermarket Rxv brake work yet.
|
|
|
|
|
07-08-2018, 06:19 PM
|
#4 |
|
Gone Insane
 Join Date: Oct 2015
Location: TN/NC/GA Tri-state area
Posts: 3,952
|
Re: 2011 rev motor brake
A Reliance aftermarket motor brake is what destroyed the motor brake FET on my 2012 RXV. It was drawing more power than even a Curtis controller motor brake FET could handle.
|
|
|
|
|
07-10-2018, 02:17 PM
|
#5 |
|
Gone Wild
Join Date: Oct 2008
Location: East Texas
Posts: 586
|
Re: 2011 rev motor brake
You can unlock the parking brake and get it to center and install it by manually using the plugs under the run tow switch. But as others have said, it won't last long with your Danaher controller.
|
|
|
|
|
09-01-2018, 11:42 AM
|
#6 |
|
Getting Wild
Join Date: Nov 2017
Posts: 110
|
Re: 2011 rev motor brake
My buddies parking brake locked up on his 2008 48v RXV this morning. Anyone have a preferred vendor/link for the OEM replacment?
Anyway to get it to run with no brake? Just want to get it back into the toy hauler without the running start technique. Sent from my SM-G965U using Tapatalk |
|
|
|
|
09-01-2018, 11:49 AM
|
#7 |
|
Gone Wild
Join Date: Mar 2014
Location: NE Indiana & SW Florida
Posts: 3,238
|
Re: 2011 rev motor brake
|
|
|
|
|
09-01-2018, 11:53 AM
|
#8 |
|
Getting Wild
Join Date: Nov 2017
Posts: 110
|
Re: 2011 rev motor brake
Thanks for the quick response. Should he replace the solenoid as stated in the description?
Sent from my SM-G965U using Tapatalk |
|
|
|
|
09-01-2018, 12:59 PM
|
#9 |
|
Gone Wild
Join Date: Mar 2014
Location: NE Indiana & SW Florida
Posts: 3,238
|
Re: 2011 rev motor brake
If he does, replace it with the same voltage solenoid it had on it. Probably a 36v solenoid is my guess.
|
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| 2011 RXV Brake Issue | Electric EZGO | |||
| 2011 G29 Drive Grinding Brake | Electric Yamaha | |||
| 2011 club car precedent dash brake light relay wire colors | Electric Club Car | |||
| Brake cable for a motor band brake | Electric EZGO | |||
| 2011 RXV quit and brake engaged | Electric EZGO | |||
Linear Mode
