|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
07-22-2018, 11:18 PM | #1 |
Not Yet Wild
Join Date: Aug 2016
Posts: 4
|
Does anyone know the RPM specs of this motor?
I am trying to make sure I set the Alltrax speed controller properly. One of the settings is the motors RPMs but I cannot find anything on what they are.
Here is what is on the label. Advanced D.C. Motors, Inc. Part No: DE3-4009A Volt: 36/48 Serial: 390 Rating: AU2500 02/18/05 The end is sealed, not vented like some I have seen. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
07-23-2018, 12:02 PM | #2 |
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: Does anyone know the RPM specs of this motor?
Unless otherwise specified, 6000RPM is safe for most DC golf cart motors.
The real purpose of the Speed Limit setting in the XCT is allow the max cart speed to be limited to less than max speed cart is capable of going if inexperienced drivers will be using cart, the warning to set to motor manufacturer's limit or below, is probably something that was added by lawyers rather than engineers. |
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Anyone know specs for motor AMD DL9-4006? | Electric EZGO | |||
D&D motor question & specs | Electric Club Car | |||
Stock motor specs | Electric EZGO | |||
RXV Motor Specs | Electric EZGO | |||
Need Specs For Advanced DC Motor | Electric EZGO |