|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
08-30-2018, 09:46 PM | #1 |
Getting Wild
Join Date: May 2017
Posts: 94
|
alltrax install question HELP!!!
Im in the middle of my 36 to 42 volt conversion,,,
installing 4g wirer alltrax sr48500 controller 400amp solenoid HD F/R switch,,,, all parts needed on hand and half way installed,,, but I'm stuck and have a quick question.... my 2004 ego txt series cart with a stock 4 blade controller terminals are labeled,,, B- B+ M- AND A2 im in the process of the upgrade. looking at my new controller and the wiring diagram and i only have 3 main terminals???? B+ B- and M-. question is,, where is the 4th main terminal on my alltrax controller?,,, A2? did i get the wrong controller? |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
08-30-2018, 10:07 PM | #2 |
Gone Wild
Join Date: Sep 2016
Location: Northern California
Posts: 1,300
|
Re: alltrax install question HELP!!!
I had the same question, and the answer is no. Follow the diagram Scotty provided and you’ll be good.
|
08-31-2018, 06:31 AM | #3 | |
Gone Wild
Join Date: Jun 2017
Location: Savannah, GA
Posts: 6,539
|
Re: alltrax install question HELP!!!
Quote:
2 of the wires share a terminal. Look at the diagram carefully. [emoji106][emoji2532] Club Car DS driver’s club #59 |
|
08-31-2018, 08:06 AM | #4 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,358
|
Re: alltrax install question HELP!!!
SR install for TXT. Or 4 to 3 terminal install.
Your old controller may have had the A2 terminal with 2 cables going to it. This terminal has been eliminated. The 2 cables that went to controller A2 went to the motor and the F&R. These 2 cables are replaced with 1 that goes from motor A2 to the top lug on the F&R. In the early days we used to take these 2 cables and bolt them together to make one - essentially what you are doing is bypassing the missing controller terminal. I hope this helps. |
08-31-2018, 11:09 AM | #5 |
Getting Wild
Join Date: May 2017
Posts: 94
|
Re: alltrax install question HELP!!!
thank you all, very much... i will carry on with the installation and report back.
|
08-31-2018, 06:25 PM | #6 |
Getting Wild
Join Date: May 2017
Posts: 94
|
Re: alltrax install question HELP!!!
id like to say I'm making forward progress buts quite the opposite. all done went to test drive and when in forward it goes reverse and in reverse, forward.. I'm going to start digging, thinking maybe the f&r is wired backwards???
anyone with an quick answer let me know.. happy labor day |
08-31-2018, 06:36 PM | #7 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,358
|
Re: alltrax install question HELP!!!
Swap the 2 cables at the 9 oclock and 3 oclock position on the F&R.
|
08-31-2018, 07:40 PM | #8 |
Getting Wild
Join Date: May 2017
Posts: 94
|
Re: alltrax install question HELP!!!
|
08-31-2018, 07:57 PM | #9 |
Gone Wild
Join Date: Jun 2017
Location: Savannah, GA
Posts: 6,539
|
Re: alltrax install question HELP!!!
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Alltrax XCT PDS Install question | Electric EZGO | |||
New Alltrax TXT48300 install question/issue | Electric EZGO | |||
Alltrax XCT Install Question | Electric EZGO | |||
Alltrax xct install | Electric Club Car | |||
Help with alltrax install | Electric EZGO |