|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
05-29-2019, 12:50 PM | #1 |
Gone Wild
Join Date: Jul 2012
Posts: 527
|
2001 Ezgo txt shuttle 2+2 changing to 48v question
Ok, this really has a long story that I won't bore everyone with, but what all would need to be changed to convert a 2001 ezgo shuttle 2+2 to 48v?
It has a D&D motor system model 170-003-0001. The speed controller is I assume the stock one I can't find a model number, but I will include pictures of it. Would both of these have to be replaced to convert it to 48v? Or, will either or both run on 48v? Thanks!! |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
05-29-2019, 01:09 PM | #2 |
Gone Mad
Join Date: Oct 2009
Location: Buford, GA
Posts: 8,988
|
Re: 2001 Ezgo txt shuttle 2+2 changing to 48v question
We need drive type:
http://www.buggiesgonewild.com/elect...en-system.html Googling D&D 170-003-0001 says series. |
05-29-2019, 01:10 PM | #3 |
Gone Wild
Join Date: Jul 2012
Posts: 527
|
Re: 2001 Ezgo txt shuttle 2+2 changing to 48v question
its a series.
|
05-29-2019, 01:17 PM | #4 |
Gone Mad
Join Date: Oct 2009
Location: Buford, GA
Posts: 8,988
|
Re: 2001 Ezgo txt shuttle 2+2 changing to 48v question
Short answer, new controller, solenoid, cables, FNR, batteries, charger.
I bought everything in my sig from ScottyB, a site sponsor, except the motor, which you probably don't need. I'd also get a volt meter from him. https://www.cartsunlimited.net/ Follow battery break-in instructions on his site. EDIT: Go with high amp-hour batteries, given your extra weight. Most folks now go for six 8 volt batteries, though you may want to consider lithium. |
05-29-2019, 01:25 PM | #5 |
Gone Wild
Join Date: Jul 2012
Posts: 527
|
Re: 2001 Ezgo txt shuttle 2+2 changing to 48v question
So the controller will not work on 48v? I was thinking this was a 400 amp controller, but I don't know how to tell.
Thanks |
05-29-2019, 01:31 PM | #6 |
Gone Mad
Join Date: Oct 2009
Location: Buford, GA
Posts: 8,988
|
Re: 2001 Ezgo txt shuttle 2+2 changing to 48v question
Wait for someone smarter than me. Make/model if you can read it. I think I remember JohnnyB posting a shuttle manual before. Advanced Search might get you there.
|
05-29-2019, 01:55 PM | #7 | |
Gone Wild
Join Date: Jul 2012
Posts: 527
|
Re: 2001 Ezgo txt shuttle 2+2 changing to 48v question
Through my searching, I found this about the controller that I think I have.
Quote:
|
|
05-29-2019, 02:10 PM | #8 |
Gone Mad
Join Date: Oct 2009
Location: Buford, GA
Posts: 8,988
|
Re: 2001 Ezgo txt shuttle 2+2 changing to 48v question
Dunno.
xxcfdrr Total Posts: 17 Last Post: 07-21-2017 02:09 PM |
05-29-2019, 02:12 PM | #9 |
Gone Wild
Join Date: Dec 2009
Location: Aiken, SC
Posts: 13,173
|
Re: 2001 Ezgo txt shuttle 2+2 changing to 48v question
Controller might work on 48 but need to know model number. If yes then all you would need is 48 volts, charger and a solenoid.
|
05-29-2019, 02:19 PM | #10 | |
Gone Wild
Join Date: Jul 2012
Posts: 527
|
Re: 2001 Ezgo txt shuttle 2+2 changing to 48v question
I think from everything I have read that my controller is a curtis 1205-117.
kernal has been more than helpful in previous posts and everything he describes about his cart has been identical to mine. I will try and locate the label, but he says that the label is on the opposite end (bottom) of the electrical connections. Going to be hard to see without taking it out. Quote:
|
|
|
|
Similar Threads | ||||
Thread | Forum | |||
2001 EZGO Electric Shuttle-Lift with Hydraulic Brakes Problem | Electric EZGO | |||
2001 EZGO TXT light swap question | Electric EZGO | |||
2001 ez-go gas shuttle 6 wiring diagram | Gas EZGO | |||
Ez-Go 2001 Shuttle 954E Need Wiring Specs | Electric EZGO | |||
2001 EZGO question. | Members Rides |