Which wire to tap into RXV

[BobBoyce]

Not really. The controllers solenoid is turned on by a switch on the throttle pedal, so it does not stay on like the RXV solenoid does. You would need a 36V 10A or higher relay connected to the keyswitched output to supply keyswitched power to the reducer.

[yurtle]

If your reducer has a trigger wire, it's easier. Does it? Also how many positions does your key switch have?

[silvr_tung_devl]

Originally Posted by yurtle

If your reducer has a trigger wire, it's easier. Does it? Also how many positions does your key switch have?

Reducer doesn't have a trigger wire, so it like I need either a relay, or a reducer that does have a trigger wire.....

Thanks for the Info! Time to buy more parts!

[yurtle]

Wait to see if my post #12 here:

http://www.buggiesgonewild.com/elect...uestion-2.html

gets any feedback as to whether a key switch can handle an extra 10 amps for powering a reducer.

[cgtech]

Originally Posted by silvr_tung_devl

Without hijacking this thread, can this be done on an 01 txt 36v also?

On a rxv, the solenoid is on whenever the key is on. Not so on a txt (assuming the txt is working correctly), wouldn't work the same.

[Newbuggyboy]

Bob THANKS!

It works like a charm.

And thank you to everyone else.

[Mooncarter]

Originally Posted by Newbuggyboy

Bob THANKS!

It works like a charm.

And thank you to everyone else.