lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric EZGO
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV.



Post New Thread  Reply
 
Thread Tools Display Modes
Old 06-02-2019, 05:12 PM   #1
ryanbrown
Not Yet Wild
 
Join Date: Mar 2018
Posts: 4
Default 2004 electric TXT 2x2 Shuttle seat rebuild

So I am in the process of rebuilding the front and rear seats of my cart. The wooden bases were rotten beyond use for a template. Using this forum I was able to get the front seat completed. My rear seat type is the rear flip-up seat with cargo space underneath. It looked to me as though both seat bottoms were identical. However now that I've got the wood cut out and all the t-bolts in place when I attempted to put the vinyl back on it appears that maybe the seat base is not quite as deep as the front seat base. Does anybody know if in fact the rear seat is more shallow than the front?

Sent from my SM-N950U using Tapatalk
ryanbrown is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Old 06-02-2019, 06:35 PM   #2
kernal
Gone Wild
 
kernal's Avatar
E-Z-GO
 
Join Date: Jul 2010
Location: Peachtree City, Ga.
Posts: 2,759
Default Re: 2004 electric TXT 2x2 Shuttle seat rebuild

So I have one of these shuttles. I acquired the cart new and it is has the original seats and covers. Upon inspection, it sure looks to me that the front and back seat are identical with the back seat just turned around. Both seats measure ~ 20" deep.
The hip restraints on the back are turned around also so they look the same as the front.
Here's a picture.
Attached Images
File Type: jpg PB020002.JPG (507.6 KB, 0 views)
kernal is offline   Reply With Quote
Old 06-02-2019, 06:41 PM   #3
ryanbrown
Not Yet Wild
 
Join Date: Mar 2018
Posts: 4
Default Re: 2004 electric TXT 2x2 Shuttle seat rebuild

Thanks for the info. I thought that they were the same. I took the vinyl back off and think that I maybe the vinyl and or foam was not centered. I plan on trying again when my daughter can help.

Thanks again for the reply [emoji106]

Sent from my SM-N950U using Tapatalk
ryanbrown is offline   Reply With Quote
Old 06-02-2019, 06:54 PM   #4
kernal
Gone Wild
 
kernal's Avatar
E-Z-GO
 
Join Date: Jul 2010
Location: Peachtree City, Ga.
Posts: 2,759
Default Re: 2004 electric TXT 2x2 Shuttle seat rebuild

Those hip restraints need to be swapped left to right if you want the factory look.
kernal is offline   Reply With Quote
Old 06-02-2019, 10:38 PM   #5
ryanbrown
Not Yet Wild
 
Join Date: Mar 2018
Posts: 4
Default Re: 2004 electric TXT 2x2 Shuttle seat rebuild

Yeah I realized that after I mounted the seat base back on. I will probably switch them back out when I get the seat back off to recover.

Sent from my SM-N950U using Tapatalk
ryanbrown is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric EZGO


Thread Tools
Display Modes


Similar Threads
Thread Forum
Ezgo shuttle seat pod Gas EZGO
2004 Ezgo SHUTTLE 4/6 looking for a lift kit that will fit Electric EZGO
Anyone Have Rear End Diagram For 2004 ezgo shuttle Electric EZGO
2004 EZGO Shuttle 2+2 (Limp Mode?) Electric EZGO
Factory EZGO Shuttle Front Seat Golf Carts and Parts


All times are GMT -5. The time now is 12:26 PM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.