|
|
|||||||
| Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
08-22-2019, 08:08 AM
|
#1 |
|
Not Yet Wild
Join Date: May 2019
Posts: 50
|
RXV freedom mode
Hi all. I just purchased a 2011 EZ GO RXV and it's definitely set at the lowest speed possible and I can tell the speed is being limited by the speed setting. I contacted my local dealer and they indicated they can only upgrade the Curtis controller. How can I tell if my cart has the Curtis or the Danaher controller?
Thanks for any help! |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
08-22-2019, 08:16 AM
|
#2 |
|
Gone Wild
Join Date: Feb 2016
Posts: 229
|
Re: RXV freedom mode
You have a Danaher controller. If you can't find anyone local to change the speed there are services on ebay that can program it. You would have to remove the controller and send it to them.
|
|
|
|
|
08-22-2019, 09:12 AM
|
#3 |
|
Gone Wild
 Join Date: Mar 2014
Location: NE Indiana & SW Florida
Posts: 3,238
|
Re: RXV freedom mode
Where are you located? Might be a forum member close to you that can help you out.
|
|
|
|
|
08-22-2019, 09:48 AM
|
#4 |
|
Not Yet Wild
Join Date: May 2019
Posts: 50
|
Re: RXV freedom mode
Thanks for confirming! I also checked the controller and noticed the sticker did say Danaher. I'm located just outside of Nashville TN. I called another place and they said they could do the Danaher controller if it had the hookup for the device. He seemed to indicate some have hookups and some don't. From what he described, it sounded like this connection (see first pic) but I could be way off. Can anyone confirm if I have the connection needed to hook up to the pass key type device?
Thanks |
|
|
|
|
08-22-2019, 10:43 AM
|
#5 |
|
Gone Wild
Join Date: Mar 2014
Location: NE Indiana & SW Florida
Posts: 3,238
|
Re: RXV freedom mode
The plug your looking for is under the cup holder.
|
|
|
|
|
08-22-2019, 10:53 AM
|
#6 |
|
Gone Wild
Join Date: Dec 2009
Location: Aiken, SC
Posts: 13,187
|
Re: RXV freedom mode
And passkey won’t work on that one. You need the old style hand held and a password to unlock it.
|
|
|
|
|
08-22-2019, 10:56 AM
|
#7 |
|
Not Yet Wild
Join Date: May 2019
Posts: 50
|
Re: RXV freedom mode
I was just reading through another post about this and it does sound like I need to find someone with a Danaher programmer which apparently is hard to find. So far the only 2 dealers near me only do Curtis.
That being said, anyone near the Nashville area that has this type of programmer? Thanks! |
|
|
|
|
08-22-2019, 11:04 AM
|
#8 |
|
Gone Wild
Join Date: Mar 2014
Location: NE Indiana & SW Florida
Posts: 3,238
|
Re: RXV freedom mode
If you can't find someone local pm me. I'm in Indiana but maybe I can help you.
|
|
|
|
|
08-22-2019, 02:44 PM
|
#9 |
|
Gone Insane
Join Date: Oct 2015
Location: TN/NC/GA Tri-state area
Posts: 3,952
|
Re: RXV freedom mode
Too bad this post was not made prior to my trip over to the Nashville area.
|
|
|
|
|
08-26-2019, 07:41 PM
|
#10 |
|
Not Yet Wild
Join Date: Aug 2019
Location: south ms
Posts: 15
|
Re: RXV freedom mode
Im also looking for someone to do some work on my danaher controller what kinda options all there? Can i get more torque out of it? I'm adding lift and 23inch tires tomorrow so I believe that will increase the speed correct? Im mainly worried about torque this will be a off road cart to ride around on my property.
|
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Someone to program freedom mode on a rxv | Electric EZGO | |||
| Freedom mode lost | Electric EZGO | |||
| EZGO TXT Freedom ELiTE Freedom Mode - HowTo | Electric EZGO | |||
| Freedom mode | Electric EZGO | |||
| Confirming Freedom Mode | Electric EZGO | |||
Linear Mode
