What size socket

makobuggie · 01-31-2012, 06:36 AM

I have to rebuild my 81 g1, what size of socket do i need for the flywheel and the cluch?and what kind of pully for them? And the size bolt to get the cluch off?were can i buy the right pullys and the bolt?thank you people.

Field6565 · 01-31-2012, 09:30 PM

You're gonna need a harmonic balancer puller for the flywheel. And you will need a yamaha clutch puller bolt for the clutch( About $45 to $50) If you don't want to spend the money I heard you can put a rod in the crank and run a bolt into it to pop it off but the thread size is rare and hard to find.

01-31-2012, 06:36 AM	#1
makobuggie Gone Wild Join Date: Jul 2011 Posts: 389	What size socket I have to rebuild my 81 g1, what size of socket do i need for the flywheel and the cluch?and what kind of pully for them? And the size bolt to get the cluch off?were can i buy the right pullys and the bolt?thank you people.
makobuggie Gone Wild Join Date: Jul 2011 Posts: 389

01-31-2012, 09:30 PM	#2
Field6565 Gone Wild Join Date: Oct 2010 Location: Pittsburgh Pa Posts: 1,551	Re: What size socket You're gonna need a harmonic balancer puller for the flywheel. And you will need a yamaha clutch puller bolt for the clutch( About $45 to $50) If you don't want to spend the money I heard you can put a rod in the crank and run a bolt into it to pop it off but the thread size is rare and hard to find.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Forum
Socket Size For G16 Spark Plug	Gas Yamaha
Turnsignal Socket?	Electric Club Car
socket size	Gas EZGO
lighter socket,05 precident	Gas Club Car
socket in dash	Electric Club Car

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum