|
|
|||||||
| Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
  |
|
|
Thread Tools | Display Modes |
03-25-2014, 11:39 AM
|
#1 |
|
Getting Wild
Join Date: Jul 2009
Posts: 76
|
g14 specs
hello, just wondering if the cylinder and rings specs are the same for a g 9 and g14. rebuilding a g14 and found that g14 takes a different ring set than the g9 but all other parts are the same. thanks for now.
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
03-25-2014, 05:41 PM
|
#2 | |
|
Sometime's............
 Join Date: Oct 2007
Location: Tacoma Washington
Posts: 11,874
|
Re: g14 specs
Quote:
|
|
|
|
|
|
03-25-2014, 06:24 PM
|
#3 |
|
Getting Wild
Join Date: Jul 2009
Posts: 76
|
Re: g14 specs
the piston must be longer in length, not diameter because they both measure 73 mm, which led me to wonder why there were different ring sets for the g9 and g 14
|
|
|
|
|
03-25-2014, 06:48 PM
|
#4 |
|
Sometime's............
Join Date: Oct 2007
Location: Tacoma Washington
Posts: 11,874
|
Re: g14 specs
Not trying to be a smart alick. J38-displacement-285cm3/bore-stroke-73 x 68m. Jn5-dispacement-300 cm3/bore-stroke-75 x 68m. Hope that helps alittle.
|
|
|
|
|
03-25-2014, 07:13 PM
|
#5 |
|
Getting Wild
Join Date: Jul 2009
Posts: 76
|
Re: g14 specs
ok. maybe i dont have a g14/ cant locate model number. looked every where, the cylinder measures 73 dia, the head gasket is exactly the same as my g9 the only part that is different is the air filter and the way the air filter is run, comes out behind drivers leg. is there any other way i can tell what i have for a cart.
|
|
|
|
|
03-25-2014, 07:18 PM
|
#6 |
|
Sometime's............
Join Date: Oct 2007
Location: Tacoma Washington
Posts: 11,874
|
Re: g14 specs
Can you post some pictures of the engine compartment?
|
|
|
|
|
03-25-2014, 07:59 PM
|
#7 |
|
Getting Wild
Join Date: Jul 2009
Posts: 76
|
Re: g14 specs
|
|
|
|
|
03-26-2014, 08:53 AM
|
#8 |
|
Sometime's............
Join Date: Oct 2007
Location: Tacoma Washington
Posts: 11,874
|
Re: g14 specs
That is a G14 car. Maybe some put a J38 long block into it? The block (behaind the cylinder) would be stamped (J3
 . It would work fine as long as you use the G14 ignition pickup, the flywheel and coil from the G14. |
|
|
|
|
03-26-2014, 09:58 AM
|
#9 |
|
Getting Wild
Join Date: Jul 2009
Posts: 76
|
Re: g14 specs
alright, thanks for your help, much appreciated.
|
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| PB-6 Pot specs | Electric Club Car | |||
| specs g22 357 ccm | Gas Yamaha | |||
| torque specs | Gas EZGO | |||
| specs | Gas EZGO | |||
| gas 290 specs | Gas Club Car | |||
Linear Mode
