|
Gas Club Car Gas DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
04-26-2010, 03:16 PM | #11 |
Gone Wild
Join Date: Dec 2009
Location: Corpus Christi, TX
Posts: 1,644
|
Re: Did the governor mod, and now bad stuff.
Wish I could help but I havent messed with my cart to make it faster. How much tension is on the pedal and butterfly on the carb? Like when you have a return spring putting tension on the linkage. It has to be something simple but I have a simple mind is thinking. Have you tried this in the next sentence with the key off then on to see what the throttle does? Put it in neutral, lifted the seat and watch the throttle while you push the pedal? Id like to know what its doing when you push it. My 99 starts in nuetral without flipping the yellow plastic piece but my 90 doesnt as I have to flip it.... Also, dont take it to the stealership, Im sure we can figure it out without there help. We are all gearheads including myself
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
04-26-2010, 03:51 PM | #12 |
Gone Wild
Join Date: Apr 2010
Location: Indiana
Posts: 165
|
Re: Did the governor mod, and now bad stuff.
I am new to, 4 replys seems like help to me. What did the other 5-6 fourms tell you to do. Not being a A$$ or anything but i and others have had post with no relys as well. BE HAPPY
Last edited by papaw; 04-26-2010 at 04:10 PM.. Reason: spelling |
04-26-2010, 05:38 PM | #13 |
Gone Wild
Join Date: Apr 2010
Location: South Texas/Saudi Arabia
Posts: 201
|
Re: Did the governor mod, and now bad stuff.
I can't put it back the way it was, the Gov. shaft isn't clocked the same way as it was originally nor do I know the original position. If someone could assist I would put it back to stock. If it were that easy I wouldn't have continued asking for help. I took it to CC and there weren't any Gas Techs there, won't be until Monday. Thanks
-SS |
04-26-2010, 05:42 PM | #14 | |
Gone Wild
Join Date: Apr 2010
Location: South Texas/Saudi Arabia
Posts: 201
|
Re: Did the governor mod, and now bad stuff.
Quote:
-SS |
|
04-26-2010, 05:51 PM | #15 | |
Gone Wild
Join Date: Apr 2010
Location: South Texas/Saudi Arabia
Posts: 201
|
Re: Did the governor mod, and now bad stuff.
Quote:
-SS -SS |
|
04-26-2010, 05:57 PM | #16 |
Gone Crazy
Join Date: Jan 2007
Location: Chesterfield, Va
Posts: 6,021
|
Re: Did the governor mod, and now bad stuff.
Ok, First thing is we don't live on the forum so you might have to wait a bit for some help.
Don't know about everyone but I know alot of great folks here and they are all family orientated and like myself spend the weekends at the lake with our families and no laptops so how about cut us some friggin slack! If you have checked and made very sure your throttle arm on the carb is moving slowly open and closed when you push the pedal slowly I would suggest you remove the air breather hose and check to see if you still have the carb "butterfly" plate on the throttle shaft inside the carb. If the throttle is working but going to WOT that would be the only reason. Good luck and keep us posted. |
04-26-2010, 06:12 PM | #17 |
Gone Wild
Join Date: Jul 2008
Location: Reddick IL
Posts: 11,220
|
Re: Did the governor mod, and now bad stuff.
Take the arm off and look for stain corosion at the gap.
I don't own one but I won't quit when I have a problem. Take the arm off mark the shaft and twirl it see how far it moves start at one extreme and work your way around. It was not born it was assembled. |
04-26-2010, 06:15 PM | #18 |
Gone Wild
Join Date: Jul 2008
Location: Reddick IL
Posts: 11,220
|
Re: Did the governor mod, and now bad stuff.
Crash are club cars known for dropping the plate off the shaft?
|
04-26-2010, 06:20 PM | #19 |
Gone Crazy
Join Date: Jan 2007
Location: Chesterfield, Va
Posts: 6,021
|
Re: Did the governor mod, and now bad stuff.
|
04-26-2010, 06:55 PM | #20 |
Gone Wild
Join Date: Apr 2010
Location: South Texas/Saudi Arabia
Posts: 201
|
Re: Did the governor mod, and now bad stuff.
Ok, so take the gov. arm of and turn the shaft noticing how far it turns? What's this about a plate falling off? I'm working on it in the garage, I'll be in and out.........
-SS |
|
|
Similar Threads | ||||
Thread | Forum | |||
I need to get rid of stuff! | Autos/Side x Sides/ATVs/4x4's |