05-20-2010, 10:01 AM | #1 |
Not Yet Wild
Join Date: May 2010
Posts: 5
|
2000 cc Valve Stuck Open
So we had this cart running before and the Exaust Valve got stuck open, We took the cart to a mechanic in town here and he got it running (big $$) we take the cart home and poof its stuck open again
Ive added some pictures you can see the spring does not fully extending leaving such a gap that when i cycle the engine the rod shoots right out!! totally loose SO Heres the big question... its been abused and rolled lots so could this be chunks of gunk/carbon that keep getting stuck, b/c it had been running when we picked it up from the mech. Whats are my options? pull head off, clean, gaskets, ???sea foam??? if so i need to know where to get gaskets and which ones to get thanks for your input SHADANATOR |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
05-21-2010, 05:53 AM | #2 |
Gone Crazy
Join Date: Jan 2007
Location: Chesterfield, Va
Posts: 6,021
|
Re: 2000 cc Valve Stuck Open
I would pull the head for an inspection, valves need to come out and inspected for bent stem or maybe valve seat coming out?
Don't short cut it or it could cost you more in the long run. |
05-21-2010, 09:27 AM | #3 |
Not Yet Wild
Join Date: May 2010
Posts: 5
|
Re: 2000 cc Valve Stuck Open
ok i need to know where i can get a head gasket and any others i may need for this... valve gaskets ? ? ?
please help me out here? ?!?! |
05-21-2010, 09:34 AM | #4 |
Gone Crazy
Join Date: Jan 2007
Location: Chesterfield, Va
Posts: 6,021
|
Re: 2000 cc Valve Stuck Open
|
05-21-2010, 12:18 PM | #5 |
Not Yet Wild
Join Date: May 2010
Posts: 5
|
Re: 2000 cc Valve Stuck Open
cool
is it possible to identify this engine fe250? 350? er what? would like to know before i order parts also any ideas on what will i need besides head gasket? valve stuff?? |
05-21-2010, 05:40 PM | #6 |
Gone Crazy
Join Date: Jan 2007
Location: Chesterfield, Va
Posts: 6,021
|
Re: 2000 cc Valve Stuck Open
Should have block ID cast in the lower back part of the block. Will read FE29 or FE35.
You might consider picking up a service manual for it, best money you could spend, it will have the step by step on teardown, inspection, reassembly and torque values in it. Plus service and repair Info on the whole cart, bumper to bumper. |
05-23-2010, 01:22 PM | #7 |
Not Yet Wild
Join Date: Mar 2010
Location: jacksonville Fl.
Posts: 49
|
Re: 2000 cc Valve Stuck Open
pull the head off no big deal the problem is the vave guide seal's are bad the guy didn't replace them I'll bet. clean the carbon off the under side of the valve's head on both put the the head back on some time's you can reuse the head gasket if you didn't mess it up when you took it off.Club Car had this problem with carbon build up they used cheap seal's for awhile.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
videos of my 2000 ez-go 4 cycle needing valve adjustment | Videos | |||
Crankcase Won't Open | Gas EZGO | |||
it goes to wide open you can not take off slow | Extreme DC! | |||
ez-go controller box - hows it open?-97 | Electric EZGO |