|
Electric golf carts Harley Davidson, Melex, Pargo, Taylor-Dunn and other Misc. Carts. |
|
Thread Tools | Display Modes |
07-22-2014, 08:09 PM | #1 |
Not Yet Wild
Join Date: Jul 2014
Location: Marion, Arkansas
Posts: 1
|
Parts for a Stealth 4X4
I'm new to the site! I'm looking for parts for a 4x4 Stealth Super Duty cart.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
07-23-2014, 09:11 AM | #2 |
STEALTH 4X4
Join Date: Sep 2011
Location: GA
Posts: 2,125
|
Re: Parts for a Stealth 4X4
|
10-12-2014, 12:52 PM | #3 |
Not Yet Wild
Join Date: Oct 2014
Posts: 1
|
Re: Parts for a Stealth 4X4
I need a price on outer cv joint boot ANd clamps for 2011 stealth apache can you help
Last edited by Rick Huffman; 10-12-2014 at 12:59 PM.. Reason: Also need the actual outer cvjoint |
10-12-2014, 01:05 PM | #4 |
STEALTH 4X4
Join Date: Sep 2011
Location: GA
Posts: 2,125
|
Re: Parts for a Stealth 4X4
I responded to your email
|
01-27-2018, 11:11 AM | #5 |
Not Yet Wild
Join Date: Nov 2017
Posts: 5
|
Re: Parts for a Stealth 4X4
SUNCO,
DO you sell the tire rod bushing? I don't think mine are bad I just don't know how to remove them from the old tire rod end. Any suggestions? |
01-27-2018, 11:34 AM | #6 |
STEALTH 4X4
Join Date: Sep 2011
Location: GA
Posts: 2,125
|
Re: Parts for a Stealth 4X4
I do sell them. Sometimes they get seized on the tie rod end. If they get stuck on there it is real difficult to get them off while the tie rod end is still attached to the tie rod.
Soak it in some oil or heat it, put it in a vise and you can ususally tap it off |
01-27-2018, 05:30 PM | #7 |
Not Yet Wild
Join Date: Nov 2017
Posts: 5
|
Re: Parts for a Stealth 4X4
If I buy the tire rod ends would you put the bushings on for me?
|
01-27-2018, 05:36 PM | #8 |
Not Yet Wild
Join Date: Nov 2017
Posts: 5
|
Re: Parts for a Stealth 4X4
I looked on your website and couldn’t find any seats for the Apache. I need a rear seat and seat assembly and a front seat
|
01-27-2018, 07:47 PM | #9 |
STEALTH 4X4
Join Date: Sep 2011
Location: GA
Posts: 2,125
|
Re: Parts for a Stealth 4X4
The bushings are listed seperate. They dont really go on the tie rod, they are pressed into the strut housing tie rod end flange (where the tie rod end mounts)
|
02-03-2018, 07:49 PM | #10 |
Not Yet Wild
Join Date: Nov 2017
Posts: 5
|
Re: Parts for a Stealth 4X4
Sunuco,
I got your parts in the mail. Thanks for the timely delivery. I replaced the rear struts and they only have about an inch of cushion before bottoming out with little weight. Is there an adjustment to make the strut stronger or do you think the leaf springs might be worn out? If so do you sell the leaf springs or can you steer me in the right direction please. Nice doing business with you. |
Tags |
spotlight79 |
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Stealth Parts. Who has them? | Electric Club Car | |||
Need stealth Apache parts | Lifted Golf Carts | |||
'09 Stealth Cart front end parts | Lifted Golf Carts | |||
Who sells parts for Stealth buggies? | Electric golf carts | |||
stealth parts needed, bushings | Golf Carts and Parts |