Driver side front wheel....am I crazy?!

[Idlehands]

Originally Posted by Mooncarter

No need to apologize for anything. The rear, the toe in/out and the entire front components play a role in what we are discussing. I do not know off the top of my head what the dimensions are as far as how much narrower the stance at the front is.

Check that the rear is securely bolted at the leaf springs to get a starting point
.

Also. Keep in mind that measurements at the front from one side to the other must be taken on a flat surface with a perfectly aligned front end, equally inflated tires, and the steering wheel clamped down without movement to tell one side from the other, and alignment to the rear. The offset makes this a challenge.

Thanks for the info no appreciate it.

[Mfierce]

There's a few videos on youtube discussing how to adjust toe in. You can adjust align the front wheel positioning. Try looking it up, I wanna say DIY posted it on youtube.

[Mooncarter]

Originally Posted by Mfierce

There's a few videos on youtube discussing how to adjust toe in. You can adjust align the front wheel positioning. Try looking it up, I wanna say DIY posted it on youtube.

There are videos on Youtube discussing everything under the sun. People come here to discuss with others who actually deal with these things on a daily basis and share that knowledge with the poster of the question.

Many videos on YouTube have cost people hundreds, and sometimes thousands of dollars. That is why people come here. If you want to use YouTube by all means do so. Don't come here telling people to do that.

[WalterM6]

You get the idea!

[Mfierce]

Ahhh every forum has to have trolls. Got it =)
A lot of people find videos more helpful. I found that one particularly helpful per this subject. So just because I didn't make the video I shouldn't inform them it's out there? Lol smh

[Idlehands]

Originally Posted by Mfierce

Ahhh every forum has to have trolls. Got it =)
A lot of people find videos more helpful. I found that one particularly helpful per this subject. So just because I didn't make the video I shouldn't inform them it's out there? Lol smh

Thanks I appreciate the link. I’ll check it out. I do actually prefer videos when available. Sometimes people miss thngs whn tping.