|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
06-30-2016, 12:36 PM | #1 |
Not Yet Wild
Join Date: Dec 2008
Posts: 10
|
New club car precedent body fit
How do I fix this? I bought the car from a dealer who had put a new body on it but I am not happy that I can see the taps along the front edge
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
06-30-2016, 01:08 PM | #2 |
revolutiongolfcars.com
Join Date: Mar 2010
Location: Golf Car Capital of The World... Augusta, Georgia
Posts: 10,224
|
Re: New club car precedent body fit
Pull the brow cap off. It's the plastic trim piece above the dash. Lift the back of the cowl up and press downward on all 5 clips until you hear them snap and re install the brow cap.
|
06-30-2016, 09:07 PM | #3 |
Gone Wild
Join Date: May 2015
Location: Houston
Posts: 903
|
Re: New club car precedent body fit
I've found that new body kits won't always snap in like the ones from factory. You have to work the new body down into the slot all the way around. It can be a pain at times. I start with the middle portion and work each side pushing down as I work toward the edges nearest the dash. I almost have to lay on the front body cowl and use my arms to work the body cowl,down into the slot along with the 5 snap clip portions. Hope that makes sense.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
2014 Club Precedent Build , Phantom Camo Body , LED Light Bar, 12V Aux battery, More! | Members Rides | |||
How to remove CC Precedent body? | Electric Club Car | |||
Club Car Precedent Body | Golf Carts and Parts | |||
F.S. Club Car precedent body | Golf Carts and Parts | |||
Precedent Body Sale | Electric Club Car |