|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
08-09-2017, 08:34 PM | #21 | |
Gone Wild
Join Date: Sep 2012
Location: Charlotte, NC
Posts: 9,329
|
Re: Pq rattlesnake and alltrax 48500.
Quote:
I see scottyb post about the hall effect throttle, so You would need to use the FNR to control the half-speed signal on the Alltrax Controller. Are you using a reverse contactor or a mechanical FNR switch? |
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
08-09-2017, 08:44 PM | #22 |
Not Yet Wild
Join Date: Jul 2017
Location: Indiana
Posts: 44
|
Re: Pq rattlesnake and alltrax 48500.
I am using a contacter. It looks like the stock f and r switch but it is a heavy duty one. You swing the lever to left for forward and right for reverse.
|
08-09-2017, 08:51 PM | #23 |
Gone Wild
Join Date: Sep 2012
Location: Charlotte, NC
Posts: 9,329
|
Re: Pq rattlesnake and alltrax 48500.
With the reverse contactor you normally use the FNR "rocker" switch to activate the "reverse" input on the controller.
I have not seen the wiring diagram you used, but the same wire that goes to the "reverse" contactor positive coil activation also goes to the "reverse" input on the Alltrax Controller. |
08-09-2017, 08:57 PM | #24 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,408
|
Re: Pq rattlesnake and alltrax 48500.
He is describing a rotary F&R . He has no reduced reverse option unless he chose the additional micro switch F&R
|
08-09-2017, 08:57 PM | #25 |
Not Yet Wild
Join Date: Jul 2017
Location: Indiana
Posts: 44
|
Re: Pq rattlesnake and alltrax 48500.
That makes sense. I can fix that pretty easy. I am most interested in the top end I was supposed to get. But, I believe I am getting what I'm going to get. Particularly upset with that. I have an email to them to see what they say, but, hearing I was going to get 30 and getting 23 is a let down. I think I could have accomplished the same using a lesser expensive motor.
|
08-09-2017, 09:00 PM | #26 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,408
|
Re: Pq rattlesnake and alltrax 48500.
Again we need to know if the control is seeing a 100% throttle signal before you pass judgement on the motor. When the alltrax sees a 100% throttle signal the status LED changes from green to orange. Is the LED going orange?
|
08-09-2017, 09:03 PM | #27 |
Not Yet Wild
Join Date: Jul 2017
Location: Indiana
Posts: 44
|
Re: Pq rattlesnake and alltrax 48500.
Yes it goes orange and the throttle position reads 100% in the toolkit
|
08-09-2017, 09:05 PM | #28 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,408
|
Re: Pq rattlesnake and alltrax 48500.
Okay well, this control is set to 100% speed and it is seeing 100% throttle signal. Are all the cables new? None of the cables getting hot ?
|
08-09-2017, 09:08 PM | #29 |
Not Yet Wild
Join Date: Jul 2017
Location: Indiana
Posts: 44
|
Re: Pq rattlesnake and alltrax 48500.
Actually the controller will not turn on unless the solenoid fires. At this point it is moving. So with the brake set and a quick punch to the floor shows 100% in the toolkit. While doing the same looking at the led I see flashing green light...not orange. I just walked out to test.
|
08-09-2017, 09:11 PM | #30 |
Not Yet Wild
Join Date: Jul 2017
Location: Indiana
Posts: 44
|
Re: Pq rattlesnake and alltrax 48500.
All the cables are new 2 gauge, except the battery jumpers. I am making them tomorrow. The battery jumpers are currently the stock ones...6 gauge? They get slightly warm, but not hot.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Alltrax SR 48500 CC DS will not move | Electric Club Car | |||
Alltrax SPM 48500 error code | Electric EZGO | |||
New Alltrax bearcat 48500 iq | Electric Club Car | |||
Mounting a Alltrax 48500 in a EZGO | Electric EZGO | |||
Alltrax SPM-48500 New | Golf Carts and Parts |