|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
06-15-2013, 10:30 AM | #1 |
Not Yet Wild
Join Date: Oct 2012
Location: dover de
Posts: 71
|
coil over ?
I just installed my new coil overs last night and when I went to drive it to work this morning I could hardly move the sterring wheel right or left. You have to turn it with a lot of force. Any suggestions?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
06-15-2013, 02:13 PM | #2 |
Not Yet Wild
Join Date: Oct 2012
Location: dover de
Posts: 71
|
Re: coil over ?
Well I loosened up my bottom nuts a little and its slightly easier to turn but I think the tie rods are rubbing on the springs.....
|
06-15-2013, 05:43 PM | #3 |
Gone Wild
Join Date: Sep 2012
Location: bikini state
Posts: 2,715
|
Re: coil over ?
may have to make and weld on a new mount to get it away from the tie rods
|
06-15-2013, 08:23 PM | #4 |
Not Yet Wild
Join Date: Oct 2012
Location: dover de
Posts: 71
|
Re: coil over ?
Thanks! What I noticed was that when I" loosened everything up tonight that I believe the axle rotated backward a little which put the tie rod right on the spring. I pulled the axle forward by hand as much as possible while tightning the spring bolts down and it seems to have givien me enough room. I think I really need a new front end including a new lift. Ohwell, little by little.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
exitor coil and coil and head for 1990 C.C. | Golf Carts and Parts | |||
Coil for g16 | Gas Yamaha | |||
10.4v to coil wires until i hook up coil, then zero | Gas EZGO | |||
new coil | Gas Club Car | |||
need a coil for a 81 G-1 | Golf Carts and Parts |