|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
11-18-2013, 10:12 AM | #11 |
Not Yet Wild
Join Date: Nov 2013
Location: Mississippi
Posts: 11
|
Re: 95 EZ Go Medalist Series will not go
I believe i have the problem. The brand new contact board is cracked and the C post is slightly receded. I am going to replace the switch assembly, as everything else has checked good so far. When I get one and install it, I will let you know the results. Thank you so much for your time and assistance. Lesson re-learned... Never assume that NEW means it is GOOD.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
11-21-2013, 02:18 PM | #12 |
Not Yet Wild
Join Date: Nov 2013
Location: Mississippi
Posts: 11
|
Re: 95 EZ Go Medalist Series will not go
Gentlemen,
Thank you for the assistance. I replaced the F&R Contact board and am now back in business. Upon close examination of the faulty board, there was a crack down the middle and was melted around the A & C contacts allowing the contacts to recede into the board. Hopefully this is the end of my troubles for a while. Thanks, again, for everything! Jason McC. |
|
|
Similar Threads | ||||
Thread | Forum | |||
96 medalist series reverse | Electric EZGO | |||
Resistor, Controller, Series, PDS, DCS, AC, Medalist, Marathon, TXT... | Electric EZGO | |||
Club Car Series Controller + EZGO Series Wound Motor | Electric Club Car | |||
6x6V series or 2x3x12V Series/parallel | Electric golf carts | |||
95 Medalist | Gas EZGO |