04-02-2016, 02:50 PM | #1 |
Gone Wild
Join Date: Jan 2011
Location: mascoutah,il
Posts: 386
|
Dpi ???
I have a 48v buggy with 6-8v napa batties (east penn). The pack voltage after a charge is 52.2v,each battery is 8.7-8.8v. When the charger turns off the pack voltage is 53.6v. I am using mode 2 on the charger,do you think that is the correct mode or should i be using a high mode?? Thanks
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
04-02-2016, 04:41 PM | #2 |
Gone Wild
Join Date: Jun 2014
Location: Sunset Bay, TN
Posts: 2,390
|
Re: Dpi ???
Sounds just about spot on... NAPA batteries are no different than any other FLA battery such as Trojan & Crown... My DPI floats my batteries at an even 53.0 volts... You are good anywhere between 51 and 54 float volts, if kept much higher for extended periods I might worry about gassing...
|
04-03-2016, 08:38 AM | #3 |
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: Dpi ???
What is the pack voltage after the batteries have been allowed to rest (IE: charger disconnected from cart and cart has not been used) for 12 hours?
|
04-03-2016, 06:40 PM | #4 |
Gone Wild
Join Date: Jan 2011
Location: mascoutah,il
Posts: 386
|
Re: Dpi ???
52.2v
|
04-04-2016, 09:55 AM | #5 |
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: Dpi ???
|
04-04-2016, 01:17 PM | #6 |
Gone Wild
Join Date: Jan 2011
Location: mascoutah,il
Posts: 386
|
Re: Dpi ???
Thanks
|