|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
06-04-2016, 11:37 AM | #1 |
Gone Wild
Join Date: May 2016
Location: California
Posts: 210
|
Alltrax xct setup
So i got the alltrax xct 48400 installed in my yamaha drive and the cart is now at 8 mph max. The controller is blinking green 3 times at startup then stays solid green. At 55% throttle, the speed sensor is at 0 rpm, battery current is at 15.5 amps, motor current is at 25.3 amps, and field current is at 9.4 amps. I have torn the alltrax manual apart and am just not finding the info i need. Any help is greatly appreciated.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
06-04-2016, 12:09 PM | #2 |
Gone Wild
Join Date: Apr 2016
Location: Greenwood, SC
Posts: 1,291
|
Re: Alltrax xct setup
Wouldn't this post be better served in the Yamaha electric section?
|
06-04-2016, 12:32 PM | #3 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,406
|
Re: Alltrax xct setup
Sorry I was out - Open the program again. Make the YDRE throttle setting selection and then hit 'set' the set button turns blue. Wait for the set button to clear again... then close the program and reopen the program... throttle setting should have stayed YDRE
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Alltrax setup | Electric Club Car | |||
setup | Bike & ATV Engine Swaps | |||
WTB 400-500amp alltrax controller setup. | Golf Carts and Parts | |||
Will 15.5hp motor work with 300amp alltrax and 48v setup. | Electric EZGO | |||
Anybody ever done this setup? | Big Block Talk! |