Club Car 98' HD Solenoid not clicking

[scrannel]

Originally Posted by Ms506s

re-wired ignition switch with the broken blue wire. Still nothing. Might be time to call over a golf cart pro. I'm not getting any voltage at the HD F&R switch as of now.

As has been said, go to post nine and read -- very A, B, C walkthrough. Got my cart back running.

[Ms506s]

Okay went back to post 9.

I have voltage from blue and green wires from ignition switch. Check mate.

When I put into forward and test the green white cable on F&R switch, Nadda. The throttle micro switch in the vglide i replaced a week ago when I had the initial problem. Unless I didn't plug it in right when re-installing, can that be the reason the only wire that gets voltage on F&R is the orange/brown looking on on the 2nd micro switch? I have voltage coming out of all posts of F&R except the micro switches.

To the test, it says throttle micro switch is bad. I will recheck it tomorrow, it is a pain in the ***, gotta take out the batteries on the side to get access to it.

So can the micro switch on the throttle be the reason why it all of a sudden stooped working and the solenoid no longer engages unless jumped?