Controller question

scottyb · 11-20-2018, 12:23 PM

The TXT heat sink mount is located pretty high and dry. If you are seeing some splashing from underneath or behind add some shielding while not blocking normal air flow.

I have just asked Alltrax support how water resistant (proof) the XCT controller is - I will post their response below.

The units with the 23pin amp seal connector (g19/OEM/1268/66/64) are the most resistant, because that is a waterproof plug. The other models you would want to hit all the connections with petroleum jelly (or something of the sort) to make sure you can’t get any water seeping into the plugs and causing an issue. Excluding the connections though, all the internal components are fully coated in epoxy so if water got inside the housing it won’t matter.

Snuffy1757 · 11-21-2018, 10:20 AM

Thanks Scotty. That makes me feel better.

scottyb · 11-21-2018, 10:36 AM

You and me both

11-20-2018, 12:23 PM	#11
scottyb Happy Carting Join Date: Dec 2007 Location: Southern California Posts: 73,399	Re: Controller question The TXT heat sink mount is located pretty high and dry. If you are seeing some splashing from underneath or behind add some shielding while not blocking normal air flow. I have just asked Alltrax support how water resistant (proof) the XCT controller is - I will post their response below. The units with the 23pin amp seal connector (g19/OEM/1268/66/64) are the most resistant, because that is a waterproof plug. The other models you would want to hit all the connections with petroleum jelly (or something of the sort) to make sure you can’t get any water seeping into the plugs and causing an issue. Excluding the connections though, all the internal components are fully coated in epoxy so if water got inside the housing it won’t matter.

11-21-2018, 10:20 AM	#12
Snuffy1757 Getting Wild Join Date: Sep 2012 Location: Moulton,Alabama Posts: 82	Re: Controller question Thanks Scotty. That makes me feel better.

11-21-2018, 10:36 AM	#13
scottyb Happy Carting Join Date: Dec 2007 Location: Southern California Posts: 73,399	Re: Controller question You and me both

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Forum
Controller Question	Electric Club Car
98 dcs controller question ?	Electric EZGO
Controller Question	Electric EZGO
controller question	Electric EZGO
controller question....	Electric EZGO

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum