lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car
Electric Club Car Electric DS, and Precedent golf cars



Post New Thread  Reply
 
Thread Tools Display Modes
Old 05-17-2020, 09:08 PM   #1
davidmduke
Not Yet Wild
Club Car
 
Join Date: May 2018
Location: Bogalusa, LA
Posts: 4
Default Alltrax 48300; MCor4; Shutdown and high throttle input underrange

After a two week vacation, I return to find that when my mother and brother tried to use the cart, they got about 50 feet then cart went into limp mode. We pushed it back to the charger and when plugged in, charger made a strange noise and the charger needle was jumpy.

One battery was low on fluid and had a vapor about it so I put a new 8v battery in And that corrected the charger issues.

Now alltrax toolkit gives me two errors- shutdown and high throttle input underrange. I updated my mcor2 to and mcor4 and even switched back hoping that worked. It didn’t. Back to mcor4. Changed throttle type, tried to reset OBC, removed batteries to get to alltrax and confirmed everything is right.

No sound when in reverse. No click when switching from run to tow.

Not sure what to do next. ANY help would be appreciated.

Thank you,
-David
davidmduke is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Old 05-17-2020, 11:47 PM   #2
NoleFan4Ever
MOD of all BS!
 
NoleFan4Ever's Avatar
Club Car
 
Join Date: Sep 2011
Location: Florida
Posts: 17,477
Default Re: Alltrax 48300; MCor4; Shutdown and high throttle input underrange

Clear the throttle in the Tool Kit and let it Auto Cal again.

Also is the controller flashing blink codes at the LED?
NoleFan4Ever is offline   Reply With Quote
Old 05-18-2020, 12:18 AM   #3
davidmduke
Not Yet Wild
Club Car
 
Join Date: May 2018
Location: Bogalusa, LA
Posts: 4
Default Re: Alltrax 48300; MCor4; Shutdown and high throttle input underrange

I have checked the throttle and the controller responds with ‘on’ when gas is depressed.

I have also cleared the auto-cal numerous time to no avail. The controller accepts it but the two codes remain solid.

https://postimg.cc/gallery/4Z5kfgY
davidmduke is offline   Reply With Quote
Reply

Tags
clubcar, mcor, shutdown
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car


Thread Tools
Display Modes


Similar Threads
Thread Forum
Alltrax XCT High Throttle Input Under range Electric Club Car
Alltrax SR48500 low throttle input underrange Electric EZGO
alltrax error code high throttle input underrange Electric Club Car
Cart Won't Move Alltrax Shutdown and Low Throttle Input Underange Electric Club Car
Alltrax SR error flag, High Throttle Input Under-range Electric Club Car


All times are GMT -5. The time now is 10:30 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.