Lights not working but everything else is...

Sdavila42 · 03-24-2021, 11:21 AM

We have an electric EZ GO. None of the lights are working. Checked the fuses, bulbs power in batteries etc....Can't figure it out! Thoughts?

gruelens · 03-25-2021, 02:24 AM

Welcome to the BGW Forum. There are lots of great folks here that help each other.

Your lighting circuit is simple and easy to troubleshoot with a handheld volt meter. Find where the lights are connected to the battery pack or lighting voltage transformer.

Confirm that you are getting 12+ volts dc on those wires. Follow those lighting wires and recheck voltage at every connection, switch, etc. If you find a spot with no voltage, the problem is between there and the last positive test point.

If you find 12+ volts from the battery to the lamps .... the bulbs themselves are then the problem. Just take your time, be slow and methodical, eventually you will be successful

and locate the reason your lights don't work. All the best.

Z7What · 03-25-2021, 06:48 AM

If all the lights are out it can only be one of a few things.

Bad Ground, Blown Fuse, Bad Power Wire, or a Bad Switch.....this is assuming you do not have a voltage reducer. If you have a voltage reducer then Power and Ground to and from that could be bad or the reducer itself.

Wayne

03-24-2021, 11:21 AM	#1
Sdavila42 Not Yet Wild Join Date: Mar 2021 Posts: 1	Lights not working but everything else is... We have an electric EZ GO. None of the lights are working. Checked the fuses, bulbs power in batteries etc....Can't figure it out! Thoughts?
Sdavila42 Not Yet Wild Join Date: Mar 2021 Posts: 1

03-25-2021, 02:24 AM	#2
gruelens Not Yet Wild Join Date: Nov 2014 Posts: 56	Re: Lights not working but everything else is... Welcome to the BGW Forum. There are lots of great folks here that help each other. Your lighting circuit is simple and easy to troubleshoot with a handheld volt meter. Find where the lights are connected to the battery pack or lighting voltage transformer. Confirm that you are getting 12+ volts dc on those wires. Follow those lighting wires and recheck voltage at every connection, switch, etc. If you find a spot with no voltage, the problem is between there and the last positive test point. If you find 12+ volts from the battery to the lamps .... the bulbs themselves are then the problem. Just take your time, be slow and methodical, eventually you will be successful and locate the reason your lights don't work. All the best.
gruelens Not Yet Wild Join Date: Nov 2014 Posts: 56

03-25-2021, 06:48 AM	#3
Z7What Gone Wild Join Date: Jul 2020 Location: South Louisiana Posts: 246	Re: Lights not working but everything else is... If all the lights are out it can only be one of a few things. Bad Ground, Blown Fuse, Bad Power Wire, or a Bad Switch.....this is assuming you do not have a voltage reducer. If you have a voltage reducer then Power and Ground to and from that could be bad or the reducer itself. Wayne

Similar Threads
Thread	Forum
Rxv lights not working	Electric EZGO
lights not working	Electric Club Car
Front Lights, Directional, Brake Lights not working	Electric Club Car
G16 lights not working.	Gas Yamaha
lights not working	Gas EZGO

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum