|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
03-25-2021, 09:14 PM | #1 |
Not Yet Wild
Join Date: Apr 2020
Posts: 1
|
Speed Sensor on DCS with Navitas & D&D motor
I've got a 96' EZGO TXT 36 volt DCS. I replaced the motor with a D&D upgrade that came with the speed sensor wiring. D&D told me I didn't need to hook the speed sensor up and it would work just fine. While installing the Navitas 440 amp controller, I've got appropriate voltage everywhere but the cart won't move. The controller instructions show a 6 pin connector location that requires an adapter for the speed sensor, but their site doesn't have this part listed.
Does the speed sensor need to be hooked up in order for this to work? |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
03-26-2021, 09:31 AM | #2 |
Master of All Things
Join Date: May 2013
Location: West Columbia, Texas
Posts: 18,001
|
Re: Speed Sensor on DCS with Navitas & D&D motor
well I built a DCS a while back for my nephew....but I used a ALLTRAX conrtoller....not sure that makes a difference, BUT my instructions from Scotty (as I got my new motor from him as well) told me it was NOT to be hooked up.....and its not and everything works like a champ to this day.
|
03-26-2021, 11:14 AM | #3 |
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: Speed Sensor on DCS with Navitas & D&D motor
The D&D motor will work with or without the speed sensor connected.
You can test the motor by connecting about 18V from the batteries directly to it to make sure it runs. |
07-29-2022, 08:44 AM | #4 |
Getting Wild
Join Date: Jul 2022
Posts: 79
|
Re: Speed Sensor on DCS with Navitas & D&D motor
Digging up this thread. I've got a DCS cart here with a D&D motor in it. Just wanted to clarify if I can or can't throw this in a PDS cart with a Curtis 1268? It looks like a few people have added a speed sensor to a DCS motor or the D&D motor to be compatible.
|
Tags |
36 volt, ezgo txt, speed sensor |
|
|
Similar Threads | ||||
Thread | Forum | |||
Motor Speed Sensor Issue | Columbia ParCar | |||
motor speed sensor part#? | Electric Yamaha | |||
GE Motor Speed Sensor Rebuild | Electric Club Car | |||
add speed sensor to motor? | Electric EZGO | |||
D&D motor speed sensor. | Electric Club Car |