|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
03-27-2021, 11:26 PM | #1 |
Not Yet Wild
Join Date: Mar 2021
Posts: 2
|
C54 Conversion, No Movement after trying reverse
Sent Scotty an email, may just need to wait for his response but figured I'd give this a shot in case I'm just missing something simple.
Just finished installing the full C54 conversion on a 36v cart with the SW202 FnR option. After testing voltages and powering on I was able to drive it forward for a few minutes with no issues, but after trying reverse I lost all power (forward and reverse). Also, currently no solenoid click. Any ideas on how to best troubleshoot this? Edit: After testing voltages, I noticed the pedal wasn't supplying power at all and found a blown fuse on the pedal to ignition connection. Replacing it gets the cart going forward again, but reverse blows it. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
03-28-2021, 02:19 PM | #2 |
Not Yet Wild
Join Date: Mar 2021
Posts: 2
|
Re: C54 Conversion, No Movement after trying reverse
Disregard got it sorted.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
2004 DS - Now Reverse Only - Was half-inch movement forward | Electric Club Car | |||
EZ GO Electric Cart Clicks but NO movement Forward or Reverse!! | Electric EZGO | |||
97 DS 36V - Slow in Fwd, No Movement in Reverse | Electric Club Car | |||
EZ GO Electric Cart Clicks but NO movement Forward or Reverse!! | Electric Club Car | |||
slow movement in reverse | Electric Club Car |