|
|
|||||||
| Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
04-25-2021, 08:30 AM
|
#1 |
|
Not Yet Wild
Join Date: Apr 2021
Posts: 5
|
Controller upgrade for more torque/power
I'm new to the golf cart world and just bought a 2004 36v EZgo TXT Series. It doesn't get much speed or power when going uphills. I believe the current stock controller power is at 250 amp. If I ONLY upgrade the controller and solenoid to achieve 500 or 600 amp, will this help with power on hills. I'm not looking to replace the motor now. I'm also going to eventually convert to 48V, but that will prob be in a year or 2. Thanks for any advice?
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
04-25-2021, 10:06 AM
|
#2 |
|
Master of All Things
 Join Date: May 2013
Location: West Columbia, Texas
Posts: 17,965
|
Re: Controller upgrade for more torque/power
to answer your question....YES, but also should upgrade the F&R switch as well.
|
|
|
|
|
04-25-2021, 02:26 PM
|
#3 |
|
Not Yet Wild
Join Date: Apr 2021
Posts: 5
|
Re: Controller upgrade for more torque/power
Thanks for the reply. How does the the R&F switch replacement, effect the torque/power.
Thanks! |
|
|
|
|
04-25-2021, 02:36 PM
|
#4 |
|
Gone Wild
Join Date: Dec 2009
Location: Aiken, SC
Posts: 13,120
|
Re: Controller upgrade for more torque/power
600 amp controller will melt a stock fnr switch because of the heat.
|
|
|
|
|
04-26-2021, 05:45 AM
|
#5 | |
|
Master of All Things
Join Date: May 2013
Location: West Columbia, Texas
Posts: 17,965
|
Re: Controller upgrade for more torque/power
Quote:
 |
|
|
|
|
|
04-29-2021, 06:43 AM
|
#6 |
|
Gone Wild
Join Date: Oct 2012
Location: Southwestern Pa.
Posts: 6,214
|
Re: Controller upgrade for more torque/power
Welp,.....if your on a budget and can't get the controller and F&R switch at the same time, if you get an Alltrax controller you can adjust the settings as to how many amps the controller will "allow" to be given to the cart. This may decrease the initial performance but when you upgrade the F&R switch.......change the settings again to allow for more amps.
|
|
|
|
|
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| RXV Speed/Torque Upgrade - Controller Options? | Electric EZGO | |||
| Power and torque upgrade guidance | Electric EZGO | |||
| Torque Gain After Controller Upgrade | Electric EZGO | |||
| EZGO PDS Power/Torque Upgrade? | Electric EZGO | |||
Linear Mode
