![]() |
|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
![]() ![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Not Yet Wild
Join Date: Nov 2011
Posts: 10
|
![]() Hello All!!!
I would like to make a hack to my EZ GO ignition so I can remotely start it with an Arduino microcontroller. In order to do that I must switch it using a relay or a MOSFET. I would your help! I believe what I have is an EZ GO TXT (how can I tell for sure?) I saw I have 2 white wires and one red which as far as I saw is connected to the battery meter. What is the voltage running through the keyswitch? what is current? does the current change when the motor is running on full load or is it a different circuit which is not influenced? After it will work I can post an example and an explanation how it's working if that interests you guys... The logic circuit is already working, I just need the actual switching... Thank you very much in advance! waiting for your help... |
![]() |
![]() |
![]() |
|
![]() __________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
![]() |
#2 |
Gone Wild
Join Date: Feb 2011
Posts: 341
|
![]() The keyswitch passes 36 volts to the microswitch in the ITS.
|
![]() |
![]() |
![]() |
#3 |
Gone Wild
![]() Join Date: Dec 2010
Location: Jax FL
Posts: 598
|
![]() I am a little confused, its an electric cart, and it really doesn't remote start, since nothing cranks up its electric. Unless you have a gas motor, and it still doesn't crank up till you step on the gas.
There is no real purpose for remote start unless you just dont want to turn the key and in that case put one of those cool looking push button start buttons on it. |
![]() |
![]() |
![]() |
#4 |
Gone Wild
Join Date: Feb 2011
Posts: 341
|
![]() Why do you want to remote start? if you don't want to turn the key you may as well hard wire the ignition to stay on.
|
![]() |
![]() |
![]() |
#5 |
Not Yet Wild
Join Date: Nov 2011
Posts: 10
|
![]() this golf cart is all about instant ride so everything is very quick but inserting the key to the switch is taking the "longest time" from the whole starting process.
also, my key switch is a little bit annoying... you have to insert the key very straight coz if you don't it won't get in. not like in a car that the key "slips" inside. I don't want to hard-wire it coz I don't want any of the children in my village start taking it for a ride without my permission. beside that, if there's something to hack, than why don't? :-) anyway, I understand it's 36v but is it low current through the key switch contacts? Thanks! |
![]() |
![]() |
![]() |
#6 |
Happy Carting
![]() ![]() Join Date: Dec 2007
Location: Southern California
Posts: 73,418
|
![]() It is 36v thru the key switch. What yr is the cart?
|
![]() |
![]() |
![]() |
#7 |
Not Yet Wild
Join Date: Nov 2011
Posts: 10
|
![]() |
![]() |
![]() |
![]() |
#8 |
Gone Wild
Join Date: Feb 2011
Posts: 341
|
![]() if there is no date code and only a serial number enter it on this internet.
http://www.shopezgo.com/customer-ser...ialNumber.html |
![]() |
![]() |
![]() |
#9 |
Not Yet Wild
Join Date: Nov 2011
Posts: 10
|
![]() I checked the serial number and it turns out it's a 2001 TXT.
well, does it help answering the question? |
![]() |
![]() |
![]() |
#10 |
Gone Wild
![]() ![]() Join Date: Aug 2011
Location: Bunnell, Florida
Posts: 2,408
|
![]() If this helps you, my 881 model cart has a 15amp fuse in the key switch circuit.
![]() |
![]() |
![]() |
![]() |
|
|
![]() |
||||
Thread | Forum | |||
dcs voltage drop when tow/run switch on run | Electric EZGO | |||
voltage reducer switch help! | Electric Club Car | |||
Tow/Run Switch voltage? | Electric Club Car | |||
voltage reducer, need to switch off? | Electric EZGO | |||
Won't run... no voltage @ key switch... | Electric EZGO |