Club Car Speed link 4 Precedent Golf Cart SpeedyLink

[djw]

Hey Thanks gaminde
Part list
1 390 chip=jameco ST MICRO,M74HC390B1R (ok got it)

1 5 volt regulator =jameco REGULATOR, 5V, 1A, 4 (ok got it)

1 resistor=jameco @ RES,CF,4.7K OHM,1/4 WATT,5%, (ok got it)

1 cap, Any one have the info on the capasitor???

[gaminde]

the cap is for filtering .1, .01,, 1mfd 10mfd anything will work just small and good for 30 to 50 vdc little bigger than a pencil eraser.

If you need help Im here

and if you don't need regen leave the sw out (do not need)

[djw]

Ok thanks so much parts on order.....

[Beacon]

Iv heard of guys still adding code 4 after motor upgrade and getting 2 mph out of it. Would the speedy link do the same ? Would it mess up my new PQ?

[gaminde]

I really doubt It. I would Think they already Either changed. The magnets in the motor or used a unipolar hall effect device.

[Beacon]

So your saying both are a waste of money on top of the PQ?

[drick67]

Originally Posted by Beacon

So your saying both are a waste of money on top of the PQ?

Beacon,

Rick told me I might get 1-2 mph, not worth it for $100 plus, I am going to add a 500 amp controller in the near future, I have 4ga cables coming from Scotty, just looking for more torque now, real happy with my speed.

[Beacon]

Originally Posted by drick67

Beacon,

Rick told me I might get 1-2 mph, not worth it for $100 plus, I am going to add a 500 amp controller in the near future, I have 4ga cables coming from Scotty, just looking for more torque now, real happy with my speed.

Yea that's not worth it. Getting 23-25 out of it now but live in golf cart community and there is one old man who can catch me...rubs me the wrong way.!!! Guess I'll have to get a controller and bigger wires. Can't lift it for the course and can't get any bigger with rim tire combo.

[gaminde]

This will not help torque in any way controller would be best. The speed gizmo is for stock carts with speed mode less than 4

[gaminde]

You could make it for less than 30 $