|
Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
12-06-2011, 07:40 PM | #1 |
Not Yet Wild
Join Date: Nov 2011
Posts: 12
|
More questions from my 295 motor rebuild
Ok 2 more questions and I should be all set to put this engine back together. When I took the engine apart I didn't pay attention. The rods say fan on one side, does it matter what way the rods face? My second question has to do with the timing of the crank to the balance shaft. How should this be setup? I love the place. Im sure these are easy questions for everyone but I appreciate the help.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
12-06-2011, 07:52 PM | #2 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: More questions from my 295 motor rebuild
On the rods the side marked FAN should face the fan side of the engine. The timing marks should line up like this illustration when you put the timing belt on.
|
12-06-2011, 08:06 PM | #3 |
Not Yet Wild
Join Date: Nov 2011
Posts: 12
|
Re: More questions from my 295 motor rebuild
What about the gear on the crank and the gear on the balance shaft?
|
12-06-2011, 08:25 PM | #4 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: More questions from my 295 motor rebuild
Align the single dot on the crankshaft gear in between the 2 dots on the balancer shaft gear
|
12-06-2011, 09:09 PM | #5 |
Not Yet Wild
Join Date: Nov 2011
Posts: 12
|
Re: More questions from my 295 motor rebuild
Awesome. Thanks again
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Few questions for G9 rebuild. | Gas Yamaha | |||
1990 EZ-GO rebuild & questions | Gas EZGO | |||
G9 stock rebuild questions | Gas Yamaha | |||
Carb Rebuild and other questions 295 | Gas EZGO | |||
rebuild on 2pg 244 cc engine questions | Gas EZGO |